Ampe kìm đo và tạo dòng mA, áp V FLUKE FLUKE-773 (Đo 0-100mA/0-30.00 V , tạo nguồn 0- 24.00 mA/ 0-10.00 V DC)
Hãng sản xuất: FLUKE Model: FLUKE-773 P/N: 3362365 Xuất xứ: China (Trung Quốc) - Yêu cầu báo giá
- Liên hệ
Tham khảo dịch vụ Hiệu chuẩn-Kiểm định và Sửa chữa
Gọi để có giá tốt
TP. Hà Nội: (024) 35.381.269
TP. Đà Nẵng: (023) 63.747.711
TP. Bắc Ninh: (0222)730.39.68
TP. HCM: (028) 38.119.636
- mA (kìm kẹp):
+ 0 đến 20.99 mA /0.2% + 2 counts
+ 21.0mA đến 100.0 mA /1% + 5 counts
mA (đo nối tiếp)
+ 0 đến 24.00 mA /0.2% + 2 counts
- mA tạo nguồn (Max 24 mA trong 1,000 ohms)
+ 0 đến 24.00 mA /0.2% + 2 counts
- Tạo mA mô phỏng (Max 50 V dc)
+ 0 đến 24.00 mA /0.2% + 2 counts
- Tạo nguồn điện áp (2 mA max)
+ 0 đến 10.00 V dc /0.2% + 2counts
- Đo điện áp
+ 0 đến 30.00 V dc /0.2% + 2counts
Kích thước vòng kìm: 0.177” or 4.5 mm max
Cấp bảo vệ: IP 40
Kích thước: 59 x 38 x 212 mm, (2.32 x 1.5 x 8.35 in.)
Trọng lượng: 260G, (9.1 oz.)
Phụ kiện: túi mềm, HDSD
The 773 mA Clamp Meter features:
- Best in class 0.2 % accuracy
- 0.01 mA resolution and sensitivity
- Measure 4 to 20 mA signals without ”breaking the loop”
- Measure mA signals for PLC and control system analog I/O
- Dual backlit display with both mA measurement and percent of 4 to 20 mA span
- Measurement Spotlight illuminates hard to see wires in dark enclosures
- Detachable clamp with extension cable for measurements in tight locations
- Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
- Automatically change the 4 to 20 mA output for remote testing
- Power saving features, auto-off, backlight timeout extend battery life
- Hold function captures and displays changing measurements
- Measure 4 to 20 mA signals with in-circuit measurement
- Simultaneous mA in-circuit measurement with 24V loop power for powering and testing transmitters
- Source 4 to 20 mA signals for testing control system I/O or I/Ps
- mA output linear ramp or 25% step output
- Automatically change the 4 to 20 mA output for remote testing
- DC voltage measurement to verify 24V power supplies or voltage I/O signals
- Source DC voltage to test input devices that accept a 1-5V or 0 to 10V signals
- Scaled mA output provides a continuous mA signal that corresponds to the 4 to 20 mA signal measured by the mA clamp
- Enables milliamp signal logging to a separate logging device without breaking the loop
- Output mA signal enables a logging DMM or other device to record the 4- to 20 mA signal without breaking the loop
- mA in/out: simultaneously measure the mA signal with the clamp and source a mA signal
- Apply a mA input signal to a device and measure its’ 4-20 mA output on devices such as valves or mA isolators
- Voltage output linear ramp or 25% step output
- Automatically change the voltage output for remote testing
What’s the difference between the 77X models?
. |
Fluke-771 |
Fluke-772 |
Fluke-773 |
. |
Non-contact mA loop measurement |
Integrated mA loop troubleshooting |
Advanced process troubleshooting |
mA measure, jaw | |||
mA measure, in circuit | . | ||
Loop power | . | ||
mA source | . | ||
DCV measure | . | . | |
DCV source | . | . | |
mA scaled output | . | . | |
mA in / out | . | . |
Environmental Specifications |
|
Diameter of measurable conductor | 0.177” or 4.5 mm max |
Operating temperature | -10 to 50 ºC |
Storage Temperature | -25 to 60ºC |
Operating Humidity | < 90% @ <30 c="" 75="" 30="" to="" 55="" c="" td=""> |
Operating Altitude | 0 to 2000 m |
IP Rating | IP 40 |
Size | 44 x 70 x 246 mm (2 7/8 x 5 ¾ x 11 5/8 in) |
Weight | 410 g, (14.4 oz) |
Vibration | Random 2 g, 5 to 500 Hz |
Shock | 1 meter drop test (except the jaw) |
EMI/RFI | Meets EN61326-1 Note: For current measurement w/ JAW, add 1mA to specification for EMC field strengths of 1V/m up to 3V/m. |
Temperature Coefficient | 0.01% ºC (<18ºC or > 28ºC) |
Power, battery life | (4) AA 1.5 V Alkaline, IEC LR6, 12 hours in mA source into 500 ohms |
Warranty | Three years for electronics one year for cable and clamp assembly |
Functional Specifications |
|
mA measurement (Measured by clamp) 771/772/773 |
Resolution and Range: 0 to 20.99 mA Accuracy: 0.2%+2 counts Resolution and Range: 21.0 mA to 100.0 mA Accuracy: 1% + 5 counts |
mA measurement (Measured in series with test jacks) 772/773 |
Resolution and Range: 0 to 24.00 mA Accuracy: 0.2% + 2counts |
mA source (Maximum mA Drive: 24 mA into 1,000 ohms) |
Resolution and Range: 0 to 24.00 mA Accuracy: 0.2% + 2counts |
mA simulate (Maximum voltage 50 V dc) |
Resolution and Range: 0 to 24.00 mA |
Voltage source (2 mA maximum drive current) | Resolution and Range: 0 to 10.00 V dc Accuracy: 0.2% + 2counts |
Voltatge Mesaure | Resolution and Range: 0 to 30.00 V dc Accuracy: 0.2% + 2counts |
|
- Cam kết chất lượng
- Bảo hành chính hãng
- Giao hàng tận nơi
- Đơn giản hóa giao dịch