For full functionality of this site it is necessary to enable JavaScript.

Hệ thống thử găng tay cách điện KEP SVS-12С (10kV)

Hãng sản xuất: KEP
Xuất xứ: EU
Model: SVS-12С
Dùng để thử cách điện găng tay
Dải điện áp thử AC, KV: 0.1;  10 có thể điều chỉnh từ 0-10kV
Số nguồn cao áp: 1
Kiểu bể thử: thép, bộ điều khiển bằng tay
Số kênh thử: 12
Độ chính xác cơ bản: 3%
Công suất tiêu thụ lớn nhất:, kVA: 1.5
Nguồn cung cấp: 220 ± 22
Tấn số: 50 ± 1
Trọng lượng bộ điều khiển, kg: 3
Trọng lượng bể, kg: 300
Trọng lượng  bộ cao áp, kg: trong bể
Kích thước bể thử, mm: 2015×876×1112
Cung cấp bao gồm:
- Bộ điều khiển SVS-12С  1 cái
- Cáp nguồn 1 cái
- Dây nối đất 2 cái
- Ống 1/2 "
- HDSD

Chi tiết

Datasheet

Rubber gloves tester SVS-12 is designed for testing the insulating properties of rubber gloves with an high AC voltage at mains frequency, adjustable between 0 – 10 kV.

The quality of rubber gloves is tested by applying high AC voltage of 9300 V at 50 Hz to them.

Rubber gloves tester SVS-12 provides the following:

  • Automatic discarding of those gloves, where leakage current is over 9 mA;
  • Automatic switching off the high voltage if the top lid is opened during the testing process;
  • Automatic filling gloves with water before testing;
  • Automatic delay that allows all water to drip from taps before applying testing voltage;
  • Automatically set time necessary for full test of each glove;
  • Visual control of the value of the test voltage and leakage current for each individual glove;
  • Audio signalling on the overall testing progress as well as audio indication of those gloves which failed the testing.

The tester SVS-12 allows simultaneous testing of up to 12 gloves.

 

  • Technical Specifications

Parameter

Value

Single-phase AC power supply voltage, V

220 ± 22

Frequency, Hz

50 ± 1

Power consumption, VA, max

1500

Test Mode

Testing Lamp (100V)

 Bath

Minimum RMS value of test voltage, kV

0,02

1,0

Maximum RMS value of test voltage, kV

0,1

10

Reduced error voltage measurement, %

± 3

± 3

Minimum measurement of leakage current, mA

not measured

0,3

Mmaximum measured leakage current, mA

-

9

Reduced error of current measurement, %

-

± 3

Quantity of simultaneous test of gloves on the bench pieces

12

Tthe overall cycle time for batch test gloves, min.

2

Dimensions of the control unit, mm, max

 316×187×132 

Ddimensions rack glove, mm, max

 2015×876×1112 

Weight control unit, kg, max

3

Weight rack glove, kg, max

 300 

Lifespan, years, avg

10

Degree of protection of electrical equipment from the effects of the environment stand IR30

GOST 14255-69

  •  
  • Operating Conditions

 

  • Package Contents

Name

Quantity

SVS-12С control unit

1

SVS-12С glove in front stostave:

- a high-voltage source;

- bath for testing insulating gloves included a pump

1

Power cable

1

Ground Wire

2

Hose 1/2 "

1

 

Documentation

Manual SVS-12C

1

Passport SVS-12C

1

Passport of high voltage source

1

Metrological certification of GP "Kharkivstandartmetrologiya"

Optional

 

<!--[if gte mso 9]>

  • Cam kết chất lượng
  • Bảo hành chính hãng
  • Giao hàng tận nơi
  • Đơn giản hóa giao dịch

Đăng ký nhận bản tin - cơ hội nhận khuyến mãi