emin

Máy đo điện trở cách điện IETLAB GenRad 1863 (3% ; 50 kΩ ~ 20 TΩ, 500V )

  • Hãng sản xuất : IET LAB
    Danh mục : Đo điện trở, thử cách điện
    Model : GenRad 1863
    Xuất xứ : USA
    Bảo hành : 12 tháng
  • Liên hệ
  • Gọi để có giá tốt

    • Hanoi: (024) 35.381.269

    • Đà Nẵng: (0236) 3 74 77 11

    • TPHCM: (028) 38.119.636

  • Cam kết chất lượng
  • Bảo hành chính hãng
  • Giao hàng tận nơi
  • Đơn giản hóa giao dịch

Hãng sản xuất: IETLAB
Xuất xứ: USA

( Khách hàng chọn model, thông số chi tiết tại mục Datasheet, Download/video. )

Rugged và Portable Analog Megohmmeter
Độ chính xác lên đến 3%
5 Test điện áp:  50, 100, 200, 250, 500 VDC
Dải đo 50 kΩ ~ 20 TΩ
Điện sạc max 5 mA
Analog Output

datasheet

manual

GenRad 1863 Basic Specifications:

(Full specifications can be found on the datasheet)

Resistance Accuracy: (min reading 0.5) Range 1-5: ± 2(meter reading +1)%
Range 6: ± 2% to accuracy above, Range 7: ± 4% to accuracy above
Voltage Accuracy: (across unknown): +/-2%
Short-Circuit Current: 5mA approximately
Voltage and Resistance Ranges

Voltage  Rmin (Full Scale)  Rmax  Useful Ranges 
50VDC ,100VDC 50 kΩ 2 TΩ 7
200, 250, & 500 VDC 500 kΩ 20 TΩ 7

The GenRad 1863 Megohmmeter is the choice for production and inspection tests on devices with resistances up to 20 Tohms. The GenRad 1863 will measure resistance at any of five test voltages of: 50V, 100V, 200V, 250V, and 500 VDC. Compared to the GenRad 1864, which has adjustable test voltages from 10V to 1090V, this unit has fewer controls, and is the more economical of the two models.

Stability of calibration in the GenRad 1863 Megohmmeter is maintained by use of a four-transistor unity gain amplifier. Stable power supplies and feedback voltmeter circuit minimize drift and time wasting adjustments.

Safety has not been overlooked in the GenRad 1863 Megohmmeter as evidenced by the warning light that is activated by the application of the test voltage. The maximum current possible at the terminals is limited to a 5mA. The Megohmmeter employs a Measure/Charge/Discharge switch for quick charging and discharging of capacitive devices such as long lengths of cable and capacitors.

The GenRad 1863 Megohmmeter is easy to use with direct-reading meter indication and lighted range switch that shows the multiplier for each range and voltage.

Guard and ground terminals permit measurement of grounded or guarded devices. The guard is particularly helpful in measuring three terminal resistors. The ground terminal is used on applications such as insulation resistance of cables in a water bath, where the water needs to be grounded for safety, or other devices where one of the measurement terminals is connected to earth ground.

The 1863 Megohmmeter is supplied in a robust and convenient, portable, Flip-Tilt case that is a stand for the meter in use and protects it in transit and storage.


Some GenRad 1863 Megohmmeter Applications

      • Testing Insulation Resistance of Wire and Cables

      • Testing Insulation Resistance of Capacitors, Sensors, Heating Elements

      • Measuring Reverse Resistance of Rectifiers

      • Testing Solid State Diodes

Có thể bạn thích

Thiết bị đo điện trở cách điện SEW 2803 IN (5KV, 250GΩ)

Thiết bị đo điện trở cách điện SEW 2803 IN (5KV, 250GΩ)

7,590,000VND add cart
Máy đo điện trở cách điện Sanwa MG5000 (250V~5000V/1199GΩ)

Máy đo điện trở cách điện Sanwa MG5000 (250V~5000V/1199GΩ)

12,880,000VND add cart
1
2
3
4
5
6
aaa

Đăng ký nhận tin - cơ hội nhận khuyến mãi

Khi gửi email này, tôi đồng ý với chính sách quyền riêng tư