For full functionality of this site it is necessary to enable JavaScript.

Máy phân tích công suất số Ainuo AN8711P(F)

Số kênh: 1
Các thông số đo:  U,I,P,λ,f
Dải điện áp định mức: Giá trị đỉnh 3: 60.00V / 300.0V / 600.0V
Dải dòng điện điện định mức: Giái trị đỉnh 3: 400.0mA / 4.000A / 20.00A
Độ chính xác dải điện áp, dòng điện: 40mA / 400mA / 4A : (1%~110%) × dải, 40.00A : (1%~100%) × dải
Hệ số công suất: ±(0.001 ~1.000)
Độ chính xác đo điện áp, dòng điện:  45Hz≤f≤66Hz:±(0.1% × Giá trị đọc+0.1% ×dải)
Độ chính xác đo nguồn hoạt động:  PF=1:45Hz≤f≤66Hz:±(0.1% × giá trị đọc+0.1% × dải); 0<PF<1:Add tanΦ×0.2% × giá trị đọc đến chính xác PF=1; PF=0:Add 0.2% ×giá trị đọc đến chính xác PF=1
Dải đo tần số:  DC,45Hz≤f≤66Hz, ±0.1% × Giá trị đọc
Chức năng báo hiệu: 10 groups, U, I, P, λ với cao, thấp và giới hạn cửa
Giao tiếp:  RS232(chưa bao gồm RS485, GPIB)、Remote(PASS / FAIL)
Kích thước: 213(W)×88(H)×386(D) mm
Trọng lượng: 3 kg

Chi tiết

 

Product Detail

Introduction
AN8721P(F)/AN8711P(F) AC/DC power meter adopts ARM7 series controller as the core,using direct sampling and intellignet indentification technology,widely used for single-phase electrical equipments test,such as voltage,current,power,power factor,frequency,electric energy,time etc,Highlighted LED 3-window display ,simple and fast operation,serial communication,over limit alarm,voltage/current ratio setings and other functions,prcise and durable.
Main features
* Beautiful appearance,compact dimensions,low weight;
* Fast measurement speed,up to 200ms refresh rate;
* Voltage/current ratio can be set to expand measuring range;
* Sound & light alarm for voltage/current/power over limit,satisfy fast identification of defected products on production line;
* Minimum current measurement range is low to 0.4mA,meet the test requirement of standby power consumption;
* Wide AC/DC range,suitable for various load;
* RS-232/RS-485 port to realize automatic testing and data transmission;
* Optional I/O prot to realize remote control signal iput and alarm signal output
Functions
* Parameter sttings:voltage/current ratio,integral threshold current,electric energy accrmulating time,voltage upper/lower limti,current upper/lower limit,power upper/lower limits,alarm delay time,address,baud rate,buzzer On/Off,calculation mode and other parameters can be set,and preset parameters will be memored;
* Over limit alarm;sound & light alarm as certain parameter is out if the preset range,giving sound & light alarm signal automatically and output the digital signal(optional);
* Swithc of range:manual set to range,or power meter will automatically switch to a proper rangge under Auto range mode;
* Accumulating Time:electric energy accumulating time can be set;
* Engrgy accumulation:display the accumulated electric energy within the preset time;
* Ratio settings:voltage/current ratios can be set based on the actual measurement and the ratio of primary and secondary of external transformer,easy expansion;
* Serial communication:test results can be collected via RS-232 or RS-485(optional)on computer.

 

Model

AN8721P(F)

AN8711P(F)

Channel

1

1

Measurement parameters

UIPQSλΦfWhTimePavgPint

UIPλf

Voltage rated range

Crest Factor 360.00V / 300.0V / 600.0V

Crest Factor 360.00V / 300.0V / 600.0V

Current rated range

Crest Factor 340.00mA / 400.0mA / 4.000A / 40.00A

Crest Factor 3400.0mA / 4.000A / 20.00A

Voltage/current accuracy range

40mA / 400mA / 4A : (1%110%) × range,

40.00A : (1%100%) × range

40mA / 400mA / 4A : (1%110%) × range,

40.00A : (1%100%) × range

Power factor range

±(0.001 1.000)

±(0.001 1.000)

Voltage/current measurement accuracy

DC±(0.2% × reading+0.2% × range)

45Hz≤f≤66Hz±(0.1% × reading+0.1% × range)

45Hz≤f≤66Hz±(0.1% × reading+0.1% ×range)

Active power measurement accuracy

DC±(0.3% × reading+0.2% × range)

PF1

45Hz≤f≤66Hz±(0.1% × reading+0.1% × range)

0PF1Add tanΦ×0.2% × reading to PF=1 accuracy

PF0Add 0.2% ×reading to PF=1 accuracy

PF1

45Hz≤f≤66Hz±(0.1% × reading+0.1% × range)

0PF1Add tanΦ×0.2% × reading to PF=1 accuracy

PF0Add 0.2% × reading to PF=1 accuracy

Power resolution

0.01W

0.01W

Frequency measurement range

DC45Hz≤f≤66Hz

45Hz≤f≤66Hz

Frequency measurement accuracy

±0.1% × reading (Voltage amplitudeshould be not less than 20% of voltage range)

±0.1% × reading (Voltage amplitudeshould be not less than 20% of voltage range)

Harmonic measurement

None

None

Filter function

None

None

Energy measurement range

0999999MWh

None

Energy measurement accuracy

±1% × reading (up to 1.0000kWh)

None

Voltage/current ratio

12000

12000

Display updating intervals

0.2 / 0.5/ 1 s

0.2 / 0.5/ 1 s

Alarming function

10 groups, U, I, P, λ with Hi, Lo and door limit

10 groups, U, I, P, λ with Hi, Lo and door limit

Interface

RS232(Option RS485, GPIB)Remote(PASS / FAIL)

RS232(Option RS485, GPIB)Remote(PASS / FAIL)

Dimension

213(W)×88(H)×386(D) mm

213(W)×88(H)×386(D) mm

Bracket height

14 mm

14 mm

Weight

About 3 kg

About 3 kg

 

 

  • Cam kết chất lượng
  • Bảo hành chính hãng
  • Giao hàng tận nơi
  • Đơn giản hóa giao dịch

Đăng ký nhận bản tin - cơ hội nhận khuyến mãi