For full functionality of this site it is necessary to enable JavaScript.

Quạt thổi Ion lắp ở trên Kasuga IOH-03

Phương pháp tạo ra dòng Ion: Sự phóng điện DC
Kim điện cực phóng : Bằng hợp kim đặc biệt có sự hấp thụ bụi thấp
Nguyên lý kiểm soát Ion cân bằng *: Kiểm soát bằng mạch điện D.I.C
Ion cân bằng *: Trong phạm vi ± 10V (tại thời điểmcài đặt của nhà máy), cho phép điều chỉnh phù hợp
Tốc độ quạt:Có thể thay đổi (không theo bước)
Thể tích khí tối đa: 3.0 m3/Phút x 3 quạt
Vận tốc luồng không khí lớn nhất : 0.87m/ giây (mức cao)
- Cảnh báo hiển thị:
+ Đèn cảnh báo nhấp nháy: cảnh báo làm sạch (giới hạn kiểm soát), báo động điện áp cao
+ Đèn cảnh báo sáng: Ngắt điện áp cao (khi điện áp vượt quá phạm vi điều khiển hoặc báo động điện áp cao liên tục)
- Ngõ ra cảnh báo (ngõ ra mở rộng)
+ ion hóa ngõ ra: Trong thời gian ion hóa (ngõ ra điện áp cao)
+ Ngõ ra cảnh báo: Trong khi đèn báo nhấp nháy hoặc sáng
Ngõ vào mở rộng: Cho phép phản hồi ngõ vào về điện thế tĩnh điện hoặc sự cân bằng ion
Số lượng ozone sản xuất *: 0,02 ppm hoặc ít hơn
Môi trường hoạt động: Nhiệt độ: 0 °C-40 °C, Độ ẩm: 80% RH hoặc thấp hơn (không ngưng tụ)
Điều kiện đầu vào: AC100-240V (cho phép ghép nối nhiều thiết bị, lên tới 10 cái)
Cáp nguồn: Khoảng 1,8 m (cáp điện với điện tiếp đất)
Công suất tiêu thụ: 54VA
Khối lượng: Khoảng 5.0kg
Khoảng cách đo 300mm


Chi tiết
  • Control by the new D.I.C. circuit* not only maintains a certain ion balance but also ensures a consistent amount of ion generation. This allows ionization in the optimal condition at all times, with no degradation of ionization performance. Frequency of maintenance can thus be significantly reduced.
  • The rear fan guard can easily be removed just by sliding it, which allows easy access to the area around the electrodes, ensuring easy maintenance.
  • When the ionizer is turned on, it displays the remaining interval before the next maintenance.
  • Electrode needles made of a special alloy with low dust emission allow use of the unit in a clean-room environment.

IOH-02-03_02.gif

When the unit is turned on, it displays the remaining interval before the next maintenance by the number of LED lamps lit.

*The D.I.C. (Double Ion Control) circuit maintains the optimal condition for static elimination by simultaneously controlling the ion balance and amount of ion generation.

Specifications

Model IOH-03  IOH-02
Ion generation method DC corona discharge
Discharging electrode needle Special alloy with low dust emission
Method of ion balance control Control by D.I.C. circuit
Ion balance* Within ±10V (at time of factory shipment), permits fine tuning
Fan speed Variable (non-step)
Maximum air volume 3.0 m3/min × 3 fans or 2 fans
Maximum airflow speed* 0.87m/sec 0.70m/sec
Alarm display Alarm lamp blinking Cleaning alarm (control limit), high-voltage alarm
Alarm lamp staying lit High-voltage stop (when voltage exceeds the control range or the high-voltage alarm continues)
Alarm output
(External output)
ionization output During ionization (high-voltage output)
Alarm output While alarm lamp blinks or stays lit
External input Permits feedback input of electrostatic potential or ion balance
Amount of ozone production* 0.02 ppm or less
Operating environment Temperature: 0°C-40°C, Humidity: 80% RH or below (no condensation)
Input condition AC100-240V (permits series connection of up to 10 units)
Power cable Approx. 1.8 m (power cable with grounding electrode)
Power consumption 54VA 32VA
Mass Approx. 5.0kg Approx. 3.6kg

*Measurement distance450mm

Ionization performance

IOH-02-03_03.gif

Dimensions [mm] and names of parts

IOH-03

IOH-02-03_04.gif

Intended use

  • Ionization in a wide area on the workbench used in cell production process
  • Ionization from objects on a conveyor 
  • Cam kết chất lượng
  • Bảo hành chính hãng
  • Giao hàng tận nơi
  • Đơn giản hóa giao dịch

Đăng ký nhận bản tin - cơ hội nhận khuyến mãi