Acepom TIH030M Small induction heater

m20performance: 28 kg (61.7 lb) 

Voltage, V/Hz: 230V/50-60Hz 

Bearing:

- Maximum weight: 40 kg (88 lb) 

- Maximum bore diameter: 20 - 300 mm (0.8 - 11.8 in.) 

Temperature control:

- Range: 0 - 250 °C (32 - 482 °F) 

- Magnetic probe: Yes, K-type 

- Accuracy (electronics): ± 2 °C (± 3.6 °F) 

Time control:

- Range: 0 - 60 minutes 

- Accuracy: ± 0,01 sec. 

Maximum heating temperature*: 250°C (482 °F) 

Thermometer mode: Yes 

Bearing mode: Yes 

Power setting: 2-step; 50% or 100% 

Demagnetisation according to norms (automatic): Yes (<2 A/cm) 

Can heat sealed bearings: Yes 

Can heat pre-greased bearings: Yes 

Error guiding codes: Yes 

Thermal overload protection: Yes 

Control panel: Control panel and LED display integrated in remote control 

Operating area (w x h): 100 x 135 mm (3.9 x 5.3 in.) 

Coil diameter: 95 mm (3.7 in.) 

Dimensions (w x d x h): 450 x 195 x 210 mm (17.7 x 7.6 x 8.2 in.) 

Total weight, including yokes: 20,9 kg (46.0 lb) 

Maximum power consumption: 2,0 kVA 

Standard yokes: 

45 x 45 x 215 mm (1.7 x 1.7 x 8.4 in.) for heating bearings with bore diameter of 65 mm (2.6 in.) and larger. 

28 x 28 x 215 mm (1.1 x 1.1 x 8.4 in.) for heating bearings with bore diameter of 40 mm (1.6 in.) and larger. 

14 x 14 x 215 mm (0.5 x 0.5 x 8.4 in.) for heating bearings with bore diameter of 20 mm (0.8 in.) and larger 

Core cross section: 45 x 45 mm (1.7 x 1.7 in.) 

Bearing support arms: Yes, foldable 

Yoke storage: Yes, internal integrated in foldable bearing support arms 

Cooling fan: No 

Swivel arm: No 

Housing material: Steel and glass filled polyamide