For full functionality of this site it is necessary to enable JavaScript.

Elcometer W182---4 Analogue Concrete Test Hammer (2.207 Nm, Unit Selection)

Manufacture: Elcometer
Model: W182---4
Origin: England
Warranty: 12 month

Impact Energy: 2.207 Nm
Accuracy : Better than ± 2 Rebound Number(s) (When tested on Calibration Anvil at 80)
Resolution: 0.1 Rebound Number
Range: 10 to 70 MPa
Memory: 5000 tests
Unit Selection: N/mm2; MPa; kg/cm2; PSI     
Autonomy (Continous Use): >5 Hours     
Dimensions: Hammer: 280mm length x 55mm diameter; In Case: 190 x 100 x 350mm
Weight: 2kg (4.4lbs) with case
Packing List: Hammer 182, battery charger (UK, EUR & US), serial cable for PC, abrasive stone, instruction manual, calibration certificate and carry case

Details

Datasheet

Elcometer 182 Digital Concrete Test Hammer

The Elcometer 182 Digital Concrete Test Hammer is equipped with an electronic transducer which converts the rebound values into a reading on the digital display.

It displays a range of statistics and there is a facility to download to a PC.

The software and digital display are integrated into the design of the hammer.

  • Light and easy to use
  • High resolution and accuracy
  • Possibility to store measurements and download data to PC
  • Setting of test parameters and factors (age, shape, correction factors)
  • Rapid and simple calibration procedure
  • Selection of testing angle
  • Selection of unit (N/mm2, MPa, PSI, kgf/cm2) Automatic conversion of rebound index to equivalent compression strength
  • Selection between 7 different correlation curves between rebound index and compressive strength, 2 pre-set and 5 user definable
  • Statistical evaluation of test results (mean value, standard deviation, concrete strength estimation)
  • Supplied with abrasive stone to prepare test surface
  • Storage of up to 5,000 results
  • RS 232 output to PC
  • Rechargeable internal battery

 

Elcometer 182 Digital Concrete Test Hammer

Technical Specification

Part Number

Description

Certificate

W182---4

Elcometer 182 Digital Concrete Test Hammer

Impact Energy

2.207 Nm

 

Accuracy

Better than ± 2 Rebound Number(s) (When tested on Calibration Anvil at 80)

 

Resolution

0.1 Rebound Number

 

Range

10 to 70 MPa

 

Memory

5000 tests

 

Unit Selection

N/mm2; MPa; kg/cm2; PSI

 

Autonomy (Continous Use)

>5 Hours

 

Dimensions

Hammer: 280mm (11.02") length x 55mm (2.17") diameter

In Case: 190 x 100 x 350mm (7.48" x 3.94" x 13.78")

 

Weight

2kg (4.4lbs) with case

 

Packing List

Hammer, battery charger (UK, EUR & US), serial cable for PC, abrasive stone, instruction manual, calibration certificate and carry case

 

 

  • Quality Engagement
  • Easy change and return
  • Delivery Avaliable
  • Favorable payment

Apply your mail to get promotion information