For full functionality of this site it is necessary to enable JavaScript.

GOTT GOTT-PCB-FSU-01 PCB Drafting and Fabrication Setup

PRODUCT MODULES

PCB DESIGN KIT PCB ETCHING MACHINE & ETCHENTS 

This consists of the design and material for designing 60 PCB’s for a class of 30 students. PCB Design Kit consists of circuit schematics & the following: 

• Components such as Transistors, Diodes, IC’s for dimensional purposes, ……………50 Nos

• Copper Clad sheets cut to 6”x4” size ……… 60 Nos.

• PCB Drafting Stickers, Tapes ……… 2mm, 3mm IC Pads ………. 8 Pins Doughnut Pads ……….. 5mm Transistors pads etc. to make …………. 60 PCB’s

• Plastic films cut to 7”x5” size …………. 60 Pcs.

PCB ETCHING MACHINE & ETCHENTS

It is required to etch the design after exposing, for this the set consists of the following : 

• Etching Tank.

• Etching Trays etc.

• Chemicals required for etching, tinning etc

• Small tools required sponges, brushes, gloves etc.

• Water bath etc. for washing after etching

PCB INSPECTION STATION

This consists of the equipment and material used to design the PCB’s and then inspecting it after the PCB is made. It consists of the following: 

• Illuminated Work Station …………………… 1 No.

• Illuminated Magnifier PCB Checker …………………….. 1 No. (Magnifies the job kept under it to 2 times its size, two and half inch area is magnified)

• 10x Magnifier (Magnifier 10 times) ……………………… 1No.

• Hole Dia checker, Checks the dia. of ………………………... 1No. Component leads from 0.5mm to 4mm.

PCB DRILLING STATION WITH STAND

After Etching the design holes are to be drilled for insertion of components. After checking the diameter of the hole to be drilled by using the hole dia checker provided earlier, one can drill the holes. This station consists of the following: 

• High Speed motorized precision drilling machine

• Small tools such as drill bits of various size, tweezers, cutters, pliers etc.

PROTOTYPE TESTING BREADBOARD

Component including: 

ITEM UNIT 

Test Board 1 ea 

Regulator IC 20 ea 

Plastic Parts Container 1 ea 

Diodes 20 ea 

Resistor 20 ea 

General purpose IC 20 ea 

Capacitor 20 ea LED 20 ea 

Inductor 20 ea 

Potentiometer 20 ea 

Transistor 20 ea 

Connecting Wires 20 ea

Bridge Rectifier 20 ea

Manuals: 

(1) All manuals are written in English 

(2) Model Answer 

(3) Teaching Manuals

Details

Datasheet


DESCRIPTION 

Education institutions wishing to familiarize students with PCB techniques are forced to buy the expensive machines available in the market. GOTT has long been familiar with educational requirements and budgetary constraints. Accordingly a PCB Equipment set up is introduced which is an assemblage of tools, chemicals, jigs, fixtures and small equipment which has a do-it-yourself approach. This set up takes the students from the circuit schematic stage to final PCB. GOTT supplies enough samples and materials along with the set up to fabricate CPB’s of 6”x4” size, corresponding to a class of 30 students with each student making 2 PCB’s.

  • Quality Engagement
  • Easy change and return
  • Delivery Avaliable
  • Favorable payment

Apply your mail to get promotion information