Trek 20/20C-HS-H High-Voltage Power Amplifier (200/230V)
Manufacturer: TREK Model: 20/20C-HS-H Origin: USA Guarantee: 12 Month - Request a Quotation
- Contact
See more: Equipment Calibration-Inspection & Repair Service
Call for the best priceHanoi city: (024) 35.381.269
Danang city: (023) 63.747.711
Bac Ninh city: (0222)730.39.68
HCM city: (028) 38.119.636
Output Voltage Range: 0 to ±20 kV DC or peak AC
Output Current Range: 0 to ±20 mA DC or ±60 mA peak for 1 ms
Input Voltage Range: 0 to ±10 V DC or peak AC
Input Impedance: 25 kW, nominal
DC Voltage Gain: 2000 V/V
DC Voltage Gain Accuracy: Better than 0.1% of full scale
DC Offset Voltage: Better than ±2 V
Output Noise: Less than 1.5 V rms*
Slew Rate (10% to 90%, typical): Greater than 800 V/µs
Large Signal Bandwidth (1% distortion): DC to greater than 5.2 kHz (The unit will trip when maximum is reached)
Small Signal Bandwidth (-3dB): DC to greater than 20 kHz
Stability:
Drift with Time Less than 50 ppm/hr, noncumulative
Drift with Temp Less than 100 ppm/°C
- Voltage Monitor:
Ratio: 1/2000th of the high-voltage output
DC Accuracy: Better than 0.1% of full scale
DC Offset Voltage: Less than ±2 mV
Output Noise: Less than 10 mV rms*
Output Impedance: 47 W
- Current Monitor:
Ratio: 1 V/6 mA
DC Accuracy: Better than 1% of full scale
Offset Voltage: Better than ±10 mV
Output Noise: Less than 30 mV rms*
Bandwidth (-3dB): DC to greater than 20 kHz
Output Impedance: 47 W
- Mechanical:
Dimensions: 279 mm H x 482 mm W 654 mm D (11” H x 19” W x 25.75” D)
Weight: 24.9 kg (55 lb)
HV Connector: Caton High Voltage Connector
BNC Connectors: Amplifier Input, Voltage Monitor, Current Monitor, Remote High Voltage ON/OFF, Out of Regulation Status, Fault/Trip Status
- Operating Conditions:
Temperature: 0°C to 40°C (32°F to 104°F)
Relative Humidity: To 85%, noncondensing
Altitude: To 2000 meters (6561.68 ft.)
- Electrical:
Line Voltage: Factory Set for one of two ranges: 104 to 127 V AC or 180 to 250 V AC, either at 48 to 63 Hz
AC Line Receptacle: Standard IEC 320 three-prong AC line connector
Power Consumption: 1000 VA, maximum
- Supplied Accessories:
Operators’ Manual: PN: 23461
HV Output Cable: PN: 43466
Line Cord, Spare Fuses: PN: N5011. Selected per geographic destination
- Quality Engagement
- Easy change and return
- Delivery Avaliable
- Favorable payment