Trek PZD700A-H-M/S Piezo Driver/Power Amplifier (200/230V)

Output Voltage Bipolar Range: 0 to ±700 V DC or peak AC

Output Voltage Unipolar Range: 0 to +1.4 kV DC or 0 to -1.4 kV DC or peak AC

Output Current Bipolar Range: 0 to ±200 mA

Output Current Unipolar Range: 0 to ±50 mA

Input Voltage Range: 0 to ±10 V DC or peak AC

Input Impedance: 90 kΩ, nominal (non-inverting); 1 MΩ nominal, (inverting)

DC Voltage Gain: 0 to 300 V/V, adjustable using the front panelpotentiometer

DC Voltage Gain Accuracy: Better than 0.1% for factory set gain of 200 V/V

Offset Voltage: Less than ±500 mV

Output Noise (all ranges): 

Less than 50 mV rms to 20 kHz for a 1 nF load.

Less than 100 mV rms to 20 kHz with no load.

Slew Rate (10% to 90%, typical): Bipolar: Greater than 380 V/µs; Unipolar: Greater than 370 V/µs

Large Signal Bandwidth (-3 dB):  Bipolar: DC to greater than 125 kHz; Unipolar: DC to greater than 120 kHz

Small Signal Bandwidth (-3dB): DC to greater than 200 kHz

Dimensions (single channel instrument): 110 mm H x 220 mm x W 445 mm D (4.3” H x 8.7” W x 17.5” D)

Weight: 5 kg (11 lb) (Single channel unit)

Temperature: 0°C to 40°C (32°F to 104°F)

Relative Humidity: To 85%, noncondensing

Altitude: To 2000 meters (6561.68 ft.)

Line Voltage: 180 to 250 V AC either at 48 to 63 Hz