Yasuda 252-UL-94 Plastic Flammability Tester (Electric System)

Chamber: 1,000 × 555 × 900 mm (Volume Approx. 0.5 m3)

Specimen: L125 ± 5 mm, W13.0 ± 0.5 mm, T13 mm or less

Burner: L100 ± 10 mm, Inner Diameter φ9.5 ± 0.3 mm

Burner Base: Slide type (With Jog Dial type Controller), Inclination Angle 45 ± 2°, 20 ± 5° (5 V)

Burner Calibration Device: 

+Flow Meter: Max.150 ml/min (Scale 2 ml/min) (Standard 105 ml/min)

+Flow Meter: Max. 1,000 ml/min (Scale 10 ml/min) (Standard 965 ml/min)

+Manometer: Max. 200 (± 100) mmH2O (Scale 1 mmH2O) (Standard 10 mmH2O)

+Timer, Built-In Thermometer

Accessories: Flame Gauge (20 mm) (Option: 125 mm & 38 mm), Ring Stand,Wire Mesh, Dry Cotton Pad, Fireproof Gloves, Gas Lighter

Option: Horizontal Burning Support Fixture (HB),Plaque Support Fixture (5 V), Spring Clamp (VTM), Foam Support Fixture

Power Source: AC 100 V, 1-Phase, 10 A, 50/60 Hz

Heat Source: Methane Gas (Purity: 98 % Over)