CEDAR CD-100M トルクテスター（0.10〜10 N・m）

Measuring range  : 0.10～10　N・m (1.0～100 kgf・cm, 1.0～90 lbf・in)

(at the time of Track)

Accuracy: ±0.5％(199 or less digit±1digit)

Display: The 3.5 figures digital display of LCD

The measurement direction: CW-CCW (right and left)

Measurement Mode: Track , P-P(peak to peak) , P-D(Peak-Down) , C(Real-time Output)

High and low limits judging function:

High and low value are measurement within the limits, and can be set up.

Real-time Output: Load torque value is outputted every about1/ 180 second.

The Maximum, the minimum, and the average value display:

The maximum, the minimum value, and average value of the saved data

Automatic Clearance:

Automatically clear the displayed value after certain time

(0.5 - 3.0 sec,selectable at each 0.5 sec).

Setting 0.0 sec for manual Zero clearance

One-touch zero: A clear button is pushed and it is a zero.　 Data is outputed.

Data output: ASCII format (baud rate 19200)

Power supply: Ni-Cd chargeable battery 1.2V×5cells 700mAh

Auto power save: 10 minutes no use, automatically switch off.

Charging time: About 3 hours

Continunous working time: About 12 hours

Socket fit mouth: □ 20mm/  □9.5mm

Weight: Abbreviation   1 kg

Outside dimension: 160（W）×125（D）×55（H）

Attachment: Measurement joint　SJ50/SJ10K

Accessories(one piece each): AC/DC adaptor,

Exclusive receipt case

An inspection report, a proofreading certificate, traceability system figure