For full functionality of this site it is necessary to enable JavaScript.

Hopetech CHT3540-1 直流低抵抗計(1μΩ〜3MΩ、0.05%)

-Measurement parameters: DC resistance
-Basic accuracy: Resistance: 0.05%   
-Measurement range: Resistance: 1μΩ~3MΩ
-Signal Source: max current:Test current:<1A;Current mode: high-current, low-current, pulse current
-Range:
+9 different ranges-30mΩ,300mΩ,3Ω,30Ω,300Ω,3KΩ,30KΩ,300KΩ,3MΩ;
+Auto and manual modes are available in each range
-Measuring speed: 3 meas/sec., 15 meas/sec., 60 meas/sec. 
-Result display: direct read, ΔABS,Δ%,sorting results
-Maximum display value: 30,000 4 1/2 digit display
-Calibration: Short-circuit reset for all ranges
-Comparator: 30 sets of data records,NG-LO, GD-IN, NG-HI display and output. Beeper is adjustable.
-Trigger mode: Internal/manual/external/remote trigger
-Interface: RS-232C,handler (Optional PLC interface)
-Test terminal: four-terminal(including 2 detecting-ends and 2 driver-end )
-Power supply:
+Voltage:198VAC~240VAC; 
+Frequency: 47Hz~63Hz;
+Power: max 15VA
-Dimension : 385 mm (L)x249mm (W)x102mm (D);  
-Weight: 3.5kg

Details
The CHT3540 is a high precision DC resistance meter with wide measurement range and controlled by high-performance microprocessor .It can be used to test resistance of 1μΩ~3MΩ, maximum display value is 30,000 counts. CHT3540 can reach accuracy of 0.05% and under its maximum measuring speed of 60 times/sec. In addition, the readings beating can be controlled within 3 counts or less. The special 3 current test modes (high current, low current and pulse current) and the standard temperature compensation function can be adapted to the tests of different requirements. It can be used to measure resistance of transformer, inductance winding, relay, switch, connector contact, lead, soldering point, PCB track and hole, metal detection, etc. The RS232C and HANDLER interfaces can be used to output GD/NG signal, to improve automatic measurement ability on production line.

Model

CHT3540-1

Measurement parameters

DC resistance

Basic accuracy

0.05%

Measurement range

1μΩ~3MΩ

Signal Source

Test current:<1A;Current mode: high-current, low-current, pulse current

Range

9 different ranges-30mΩ,300mΩ,3Ω,30Ω,300Ω,3KΩ,30KΩ,300KΩ,3MΩ;
Auto and manual modes are available in each range

Measuring speed

3 meas/sec., 15 meas/sec., 60 meas/sec.

Result display

Direct read, ΔABS,Δ%,sorting results

Maximum display value

30,000 4 1/2 digit display

Calibration

Short-circuit reset for all ranges; REL function

Comparator

30 sets of data records,NG-LO, GD-IN, NG-HI display and output. Beeper is adjustable.

Trigger mode

Internal/manual/external/remote trigger

Interface

RS-232C,handler (Optional PLC interface)

Temperature compensation

accuracy:0.5 °C,range:0~100 °C

Test terminal

Four-terminal(including 2 detecting-ends and 2 driver-end )

Power supply

Voltage:198VAC~240VAC; Frequency: 47Hz~63Hz;Power: max 15VA

Dimension & weight

385 mm (L)x249mm (W)x102mm (D);  Weight: 3.5kg

Accessories

CHT9340 kelvin test wire
CHT9800 RS232C interface cable
CHT9700 temperature probe

Options

CHT0301 4-terminal test fixture

Others

Four-color VFD display, keypad lock and data hold function

  • 良質な取り決め
  • オリジナル保証
  • 宅配便
  • 買い取り簡単化

おまけチャンス‐ニュースを受ける登録