Labstac WD111 ベーシック脱イオン水システム

Water Inlet: Tap water: TDS<200 ppm (Extra pretreatment filter is recommended, if TDS>200 ppm)

Temperature: 5-45°C

Pressure: 1.0-4.0 Kgf/cm²

Flow Procedure**: PF+AC+RO+DI

Ion rejection rate: 96%-99% 

Organic rejection rate: >99% (when MW>200 Dalton)

Particles and bacteria rejection rate: >99%

Bacteria: <0.1 cfu/ml 

Output(25°C)****: 15 L/hrs

Pure water outlet: RO and deionized water

DimensionLxWxH: 410×320×420 mm

Weight: 15 kg

Standard configuration: Main body (Including 1 set of cartridges) + TDS pen+ accessory bag

Power Consumption (W): 72 W

Power Supply: AC110-220 V, 50/60 Hz

Note: *The feed water quality will influence the pure water´s quality and cartridges´ life-span. **PF:polypropylene spun fiber, AC:active carbon, RO:reverse osmosis, DI:ion exchange. ***All the specifications are tested under the situation:feed water´s TDS=200ppm, 25°C, 50psi and 15% recovery rate.

Resistivity: >13-17.5 MΩ.cm

Conductivity: 0.057-0.077µs/cm

Particle(>0.2µm): Particle (>0.2 µm)<1/ml (with terminal filter)