Lecroy WaveRunner 44MXi-A オシロスコープ（400MHz、4チャネル、5GS / s）

• Datasheet
• Specification
• Videos & Demos
• Software & Utilities
• Firmware
• Manuals
• Programming Examples
• Application Notes
• Request Demo

The Teledyne LeCroy WaveRunner Xi-A is the most powerful and capable scope available in its class. Basic system validation using advanced triggers, fast viewing modes, measurement parameters, or serial decodes is simple and easy. Advanced debug, multi-domain analysis, and waveshape analysis are possible with tools unique to WaveRunner Xi-A. Optional application packages help you make sense of well-defined problems.

Trigger on I²C, SPI, UART, RS-232, AudioBus (I²S, LJ, RJ, TDM), LIN, CAN, or FlexRay or MIL-STD-1553 serial data patterns. Intuitively decode values on the oscilloscope grid.

An extensive collection of SMART, Serial, and Digital (MS Series) triggers enables users to quickly and easily isolate events of interest (some optional).

Use the high sampling rate and WaveStream fast viewing mode to characterize signal shape, rise time, overshoot, etc., and verify the presence or absence of high-speed transients.

Sequence Mode allows you to partition your acquisition memory into segments and capture specific events over long periods of time. Then, view and analyze each segment individually.

Search and Analysis WaveScan provides the ability to locate unusual events in a single capture, or scan for an event in many acquisitions over a long period of time using more than 20 different search/scan modes. Use ScanHisto or ScanOverlay to display intuitive scanned results.

Quickly create your own measurement parameters or math functions using Excel, MATLAB®, or VBScripts (some capability optional).

Use a variety of application packages to provide detailed, fast solutions for specific problems.

WaveRunner Xi-As long memory is optimized for calculation of more information 10–100x faster than other oscilloscopes, while enabling easy access to simple zooming and positioning from the front panel.

More standard and optional measurements and more powerful math capability are provided with results returned faster than in other oscilloscopes.

Amplify your understanding with multidomain analysis of your signals. Convert signal information into Statistical domain (Histogram), Spectral domain (long memory FFTs), Jitter, Modulation, or other Measurement Parameter domains (Tracks of measurement parameters). (Some capability is optional.)

Teledyne LeCroy math, measure, and analysis tools are tightly integrated with basic scope operations. Its easy to link capabilities and expand understanding. Free yourself from constraints!

A wide variety of active FET probes, current probes, differential probes, HV probes, etc. with complete tip and ground accessories make it easy to probe your signals.

The MS Series can capture digital signals with speeds up to 500 MHz. View up to 36 digital channels with up to 50 Mpts/Ch memory and analyze analog and digital events together.

Excellent overdrive recovery and signal integrity make WaveRunner Xi-A ideal for high-voltage switching loss, conduction loss, ripple, switching power supply, and other amplifier measurements. Use with Teledyne LeCroy Differential Amplifiers for highperformance 100,000:1 Common Mode Rejection Ratio.

Extensive triggers allow fast event isolation. Measure timing statistically and view behavior graphically using histograms. Gain real understanding of root cause.

Long memory, HFREJ trigger coupling, built-in noise filtering, etc. enable fast understanding of signal behavior in circuits with a mix of slow-speed (sensor, actuator, power supply, mechanical) and high-speed signals.

Vertical System
Nominal Analog Bandwidth @ Ω 50 10 mV-1 V/div	400 MHz
Rise Time (typical)	875 ps
Input Connector	ProBus/BNC
Input Channels	4
Bandwidth Limiters	20 MHz; 200 MHz
Input Impedance	1 MΩ || 16 pF or 50 Ω
Input Coupling	50 Ω: DC, 1 MΩ: AC, DC, GND
Maximum Input Voltage	50 Ω: 5 Vrms, 1 MΩ: 400 V max. (DC + Peak AC = 5 kHz)
Vertical Resolution	8 bits; up to 11 with enhanced resolution (ERES)
Sensitivity	50 Ω: 2 mV/div–1 V/div fully variable; 1 MΩ: 2 mV–10 V/div fully variable
Offset Range	50 Ω: ±1 V @ 2–98 mV/div, ±10 V @ 100 mV/div–1 V/div; 50 Ω: 1 M Ω: ±1 V @ 2–98 mV/div, ±10 V @ 100 mV/div–1 V/div, ±100 V @ 1.02 V/div–10 V/div
Main Specifications
Probes	One PP008 per channel standard; Optional passive and active probes available.
Timebase System
Roll Mode	User selectable at <= 500 ms/div and <= 100 kS/s
Horizontal System
Timebases	Internal timebase common to all input channels; an external clock may be applied at the auxiliary input
Time/Division Range	Real time: 200 ps/div–10 s/div, RIS mode: 200 ps/div to 10 ns/div, Roll mode: up to 1,000 s/div
Clock Accuracy	<= 5 ppm @ 25 °C (typical) (<= 10 ppm @ 5–40 °C)
Sample Rate and Delay Time Accuracy	Equal to Clock Accuracy
Trigger and Interpolator Jitter	Jitter <=3 ps rms (typical)
Channel-Channel Deskew Range	±9 x time/div setting, 100 ms max., each channel
External Clock	DC to 600 MHz; (DC to 1 GHz for 104Xi and 204Xi) 50 Ω, (limited BW in 1 MΩ), BNC input, limited to 2 Ch operation (1 Ch in 62Xi-A), (minimum rise time and amplitude requirements apply at low frequencies)
Acquisition System
Single-Shot Sample Rate/Ch	5 GS/s
Random Interleaved Sampling (RIS)	200 GS/s
Maximum Trigger Rate	1,250,000 waveforms/second
Interleaved Sample Rate (2 Ch)	5 GS/s
RIS Mode	User selectable from 200 ps/div to 10 ns/div
Acquisition Memory Options	Max. Acquisition Points (4 Ch/2 Ch, 2 Ch/1 Ch in 62Xi-A) Segments (Sequence Mode)
Sequence Time Stamp Resolution	1 ns
Standard Memory	12.5M/25M 10,000
Acquisition Processing
Averaging	Summed and continuous averaging to 1 million sweeps
Enhanced Resolution (ERES)	From 8.5 to 11 bits vertical resolution
Envelope (Extrema)	Envelope, floor, or roof for up to 1 million sweeps
Interpolation	Linear or (Sinx)/x
Time Resolution (min, Single-shot)	200 ps (5 GS/s)
Triggering System
Trigger Modes	Normal, Auto, Single, Stop
Sources	Any input channel, External, Ext/10, or Line; slope and level unique to each source, except Line
Coupling	DC, AC (typically 7.5 Hz), HF Reject, LF Reject
Pre-trigger Delay	0–100% of memory size (adjustable in 1% increments, or 100 ns)
Post-trigger Delay	Up to 10,000 divisions in real time mode, limited at slower time/div settings in roll mode
Hold-off by Time or Events	1 ns to 20 s or 1 to 1,000,000,000 events
Internal Trigger Range	±4.1 div from center (typical)
Trigger Sensitivity with Edge Trigger (Ch 1–4)	2 div @ < 400 MHz 1 div @ < 200 MHz
Max. Trigger Frequency, SMART Trigger	400 MHz @ = 10 mV
External Trigger Input Range	EXT/10 ±4 V; EXT ±400 mV
Minimum Time Between Sequential Segments Sequential Segments	800 ns
Basic Triggers
Edge	Triggers when signal meets slope (positive, negative, or Window) and level condition.
TV-Composite Video	Triggers selectable fields (1, 2, 4, or 8), Positive or Negative slope, or Line (up to 1500), for NTSC, PAL, SECAM, or non-standard video (up to 1500 lines).
SMART Triggers
State or Edge Qualified	Triggers on any input source only if a defined state or edge occurred on another input source. Delay between sources is selectable by time or events.
Dropout	Triggers if signal drops out for longer than selected time between 1 ns and 20 s.
Pattern	Logic combination (AND, NAND, OR, NOR) of 5 inputs (4 channels and external trigger input – 2 Ch+EXT on WaveRunner 62Xi-A). Each source can be high, low, or don’t care. The High and Low level can be selected independently. Triggers at start or end of the pa
SMART Triggers with Exclusion Technology
Glitch and Pulse Width	Triggers on positive or negative glitches with widths selectable from 500 ps to 20 s or on intermittent faults (subject to bandwidth limit of oscilloscope).
Signal or Pattern Interval	Triggers on intervals selectable between 1 ns and 20 s.
Timeout (State/Edge Qualified)	Triggers on any source if a given state (or transition edge) has occurred on another source. Delay between sources is 1 ns to 20 s, or 1 to 99,999,999 events.
Runt	Trigger on positive or negative runts defined by two voltage limits and two time limits. Select between 1 ns and 20 s.
Slew Rate	Trigger on edge rates. Select limits for dV, dt, and slope. Select edge limits between 1 ns and 20 s.
Exclusion Triggering	Trigger on intermittent faults by specifying the normal width or period.
Color Waveform Display
Type	Color 10.4" flat-panel TFT-LCD with high resolution touch screen
Resolution	SVGA; 800 x 600 pixels; maximum external monitor output resolution of 2048 x 1536 pixels
Number of traces	Display a maximum of 8 traces. Simultaneously display channel, zoom, memory, and math traces.
Grid Styles	Auto, Single, Dual, Quad, Octal, XY, Single + XY, Dual + XY
Waveform Representation	Sample dots joined or dots only in real-time mode
Internal Waveform Memory
Internal Waveform Memory	M1, M2, M3, M4 Internal Waveform Memory (store full-length waveform with 16 bits/data point) or store to any number of files limited only by data storage media.
LeCroy WaveStream™ Fast Viewing Mode
Intensity	256 Intensity Levels, 1–100% adjustable via front panel control
Number of Channels	up to 4 simultaneously
Max Sampling Rate	5 GS/s
Waveforms	up to 8000 waveforms/second
Operation	Front panel toggle between normal real-time mode and LeCroy WaveStream Fast Viewing mode
Setup and Waveform Storage
Front Panel and Instrument Status	Store to the internal hard drive, over the network, or to a USB-connected peripheral device.
Zoom Expansion Traces
Zoom Expansion Traces	Display up to 4 Zoom/Math traces with 16 bits/data point
Interface
Remote Control	Via Windows Automation, or via LeCroy Remote Command Set
GPIB Port (optional)	Supports IEEE – 488.2
Ethernet Port	10/100/1000Base-T Ethernet interface (RJ-45 connector)
USB (Host)	5 USB 2.0 ports (one on front of instrument) supports Windows-compatible devices.
External Monitor Port	Standard 15-pin D-Type SVGA-compatible DB-15; connect a second monitor to use extended desktop display mode with XGA resolution.
Serial Port	DB-9 RS-232 port (not for remote oscilloscope control)
Auxiliary Input
Signal Types	Selected from External Trigger or External Clock input on front panel
Coupling	50 Ω: DC, 1 MΩ: AC, DC, GND
Maximum Input Voltage	50 Ω: 5 Vrms, 1 MΩ: 400 V max. (DC + Peak AC = 5 kHz)
Auxiliary Output
Signal Types	Trigger Enabled, Trigger Output. Pass/Fail, or Off
Output Signal	TTL, ˜3.3 V
Calibrator Signal	Output available on front panel connector provides a variety of signals for probe calibration and compensation.
Automatic Setup
Auto Setup	Automatically sets timebase, trigger, and sensitivity to display a wide range of repetitive signals.
Vertical Find Scale	Automatically sets the vertical sensitivity and offset for the selected channels to display a waveform with maximum dynamic range.
General
Auto Calibration	Ensures specified DC and timing accuracy is maintained for 1 year minimum.
Power Requirements	90–264 Vrms at 50/60 Hz; 115 Vrms (±10%) at 400 Hz, Automatic AC Voltage Selection Installation Category: 300V CAT II; Max. Power Consumption: 340 VA/340 W; 290 VA/290 W for WaveRunner 62Xi-A
Probes
Probe System: ProBus	Automatically detects and supports a variety of compatible probes.
Scale Factors	Automatically or manually selected, depending on probe used
Environmental and Safety
Temperature (Operating)	+5 °C to +40 °C
Temperature (Non-Operating)	-20 °C to +60 °C
Humidity (Operating)	Maximum relative humidity 80% for temperatures up to 31 °C decreasing linearly to 50% relative humidity at 40 °C
Humidity (Non-Operating)	5% to 95% RH (non-condensing) as tested per MIL-PRF-28800F
Altitude (Operating)	Operating Up to 2,000 m
Altitude (Non-Operating)	Non-Operating 12,190 m
Physical Dimensions
Dimensions (HWD)	260 mm x 340 mm x 152 mm Excluding accessories and projections (10.25" x 13.4" x 6")
Net Weight	6.95 kg. (15.5 lbs.)
Certifications
Certifications	CE Compliant, UL and cUL listed; Conforms to EN 61326, EN 61010-1, UL 61010-1 2nd Edition, and CSA C22.2 No. 61010-1-04.

OPTION

Serial Data Compliance

QPHY-ENET QualiPHY Enabled Ethernet 10/100/1000BT Compliance Software Option

QPHY-USB QualiPHY Enabled USB 2.0 Compliance Software Option

ENET-2ADA-BNCSMA Adapter Set- 2 BNC/M to SMA/F

ENET-2CAB-SMA018 Cable Set- 2 SMA-SMA 18 inches

ENET-2CAB-SMA036 Cable Set- 2 SMA-SMA 36 inches

ET-PMT Electrical Telecom Pulse Mask Software;

WRXi-SDM Serial Data Mask Software Package for WaveRunner Xi Series

Serial Trigger and Decode

WRXi-USB2-HSICbus D USB 2.0 HSIC Decode Option

CANbus TD CANbus TD Trigger and Decode Option

CANbus TDM CAN Bus Trigger, Decode, and Measure/Graph option

WRXi-DigRFV4bus D DigRF V4 Bus Decode option for WaveRunner Xi series

CANbus TD 5LIC CAN Bus Trigger and Decoding Package with License to work on 5 oscilloscopes

WRXi-NRZbus D NRZ Bus Decode Option for WaveRunner Xi

WRXi-Manchesterbus D Manchester Bus Decode Option for WaveRunner Xi

WRXi-ENETbus D ENET Bus Decode Option for WaveRunner Xi

CANbus TDM-5LIC CAN Bus Trigger, Decode, and Measure/Graph option with 1 Hardware Kit and 5 SW Licenses

TC1041-OPTO CAN 1041 Opto-isolated High-speed Trigger Coupler

TC1050-OPTO CAN 1050 Opto-isolated High-speed Trigger Coupler

TC1054-OPTO CAN 1054 Opto-isolated Low-speed Trigger Coupler

TC251-OPTO CAN 251 Opto-isolated High-speed Trigger Coupler (one is included with CANbus TD)

TC5790c-OPTO CAN 5790c Opto-isolated Single-wire Trigger Coupler

TC10011-OPTO CAN B10011S Opto-isolated Truck and Bus Trigger Coupler

WRXi-MSO-EMB Embedded bundle, Includes MS-500-36 with I2C TD, SPI TD, UART TD

WRXI-EMB Embedded bundle, Includes I2C TD, SPI TD, UART TD

WRXi-1553 TD MIL-STD-1553 Trigger and decode option for WaveRunner Xi

WRXi-ARINC429bus DSymbolic ARINC 429 Bus Symbolic Decode option for WaveRunner Xi/Xi-A

WRXi-AudioBus TD AudioBus trigger and decode for WaveRunner Xi

WRXi-AudioBus TDG AudioBus trigger, decode, and graph for WaveRunner Xi

WRXi-CANbus TD CAN Bus Trigger and Decode Option

WRXi-CANbus TDM CAN Bus Trigger Decode and Measure/Graph Option

WRXi-DigRF3Gbus D DigRF 3G Bus Decode option for WaveRunner Xi/Xi-A

WRXi-DPHYbus D D-PHY Bus Decode option for WaveRuner Xi/Xi-A

WRXI-FLEXRAYBUS TD FlexRay Trigger and Decode Option

WRXi-FlexRaybus TDP FlexRay Trigger, Decode and Physical Layer Test Option

WRXI-I2CBUS TD I2C Bus Trigger & Decode Option for WaveRunner Xi Oscilloscopes

WRXI-LINBUS TD LIN Bus Trigger & Decode Option for WaveRunner Xi Series Oscilloscopes

WRXi-PROTObus MAG Serial Debug Toolkit - Measure Analyze Graph for WaveRunner Xi/Xi-ACompatible with I2C, SPI, UART, CAN, LIN, FLX, D-PHY, DigRF 3G, DigRF v4, ARINC 429, MIL-STD-1553

WRXi-ProtoSync Decode Annotation and Protocol Analyzer Software Synchronization Option for WaveRunner Xi/Xi-ACompatible with USB2bus D, SATAbus D, SASbus D, FCbus D

WRXi-SATAbus D SATA Decode option for WaveRunner Xi/Xi-ASupports SATA Gen 1, 2, and 3.

WRXI-SPIBUS TD SPI Bus Trigger & Decode Option for WaveRunner Xi Oscilloscopes

WRXi-UART-RS232BUS TD UART and RS232 Bus Trigger and Decode Option for WaveRunner Xi Oscilloscopes

WRXi-USB2bus D USB 2.0 Bus Decode option for WaveRunner Xi/Xi-A

WRXI-SENTbus D SENT Bus Decode Option for WaveRunner Xi

Jitter Analysis Software

WRXi-JITKIT Clock, clock-data Jitter Analysis and views of time, statistical, spectral, and jitter overlay

Miscellaneous

WRXi-SOFTCASE WRXi Soft Carrying Case

WRXi-HARDCASE WRXi Hard Carrying Case

WRXi-KYBD WRXi Keyboard Accessory

WRXi-RACK WRXi Rack Mount Accessory Kit

WRXi-MS-CLAMP WRXi Clamp Mounting Stand

WRXi-A-FP-GERMAN WRXi-A German Front Panel Overlay

WRXi-A-FP-FRENCH WRXi-A French Front Panel Overlay

WRXi-A-FP-ITALIAN WRXi-A Italian Front Panel Overlay

WRXi-A-FP-SPANISH WRXi-A Spanish Front Panel Overlay

WRXi-A-FP-JAPANESE WRXi-A Japanese Front Panel Overlay

WRXi-A-FP-KOREAN WRXi-A Korean Front Panel Overlay

WRXi-A-FP-CHNES-TR WRXi-A Chinese (Traditional) Front Panel Overlay

WRXi-A-FP-CHNES-SI WRXi-A Chinese (Simplified) Front Panel Overlay

WRXi-A-FP-RUSSIAN WRXi-A Russian Front Panel Overlay

Other Software Options

WRXi-SPECTRUM Spectrum Analyzer and Advanced FFT Option for WaveRunner Xi Series

WRXi-EMC EMC Pulse Parameter Package

WRXi-STAT Histogram and Statistical Analysis Pkg.

WRXi-XDEV Advanced Customization Software Package for WaveRunner Xi Series

Data Storage Software

WRXi-AORM Advanced Options Record Measurement Package

WRXi-DDM2 Disk Drive Measurement Software Package for WaveRunner Xi Series

Remote Control/Network Options

USB2-GPIB External USB 2.0 to GPIB IEEE 488.2 adapter

Power Analysis Software

WRXi-PWR Power Analysis Option for WR Xi

Digital Filtering Software

WRXi-DFP2 Digital Filter Software Package for WaveRunner Xi Series

Mixed Signal Solutions

MS-500 500 MHz, 18 Channels, 2 GS/s, 50 Mpts/ch Mixed Signal Oscilloscope Option

MS-500-36 250 MHz,36 Ch,1 GS/s,25 Mpts/ch (500MHz,18 Ch,2 GS/s,50 Mpts/ch Interleaved) Mixed Signal Option

MS-250 250 MHz, 18 Channels, 1 GS/s, 10 Mpts/ch Mixed Signal Oscilloscope Option

Mixed Signal Accessories

PK400-1 Large Gripper Probe Set for 0.10 inch (2.54mm) pin pitch. Includes 10 probes with color coded leads

PK400-2 Medium Gripper Probe Set for 0.04 inch (1.0mm) pin pitch. Includes 10 probes with color coded leads

PK400-3 Small Gripper Probe Set for 0.008 inch (0.2 mm) pin pitch. Includes 10 probes with color coded leads

MSO-MICTOR 36 Channel Mictor Connector for MS Series (Includes 1 MSO-MICTOR-SHROUD)

MSO-3M 18 Pin 3M Interface cable MSO-3M (Mates with 3M part number 2520-6002)

MSO-DLS-36 16" Digital Lead Set, D18-D35

MSO-MICTOR-SHROUD Shroud for MSO-MICTOR connector, Kit of 3

Serial Data Test Fixtures

TF-ENET-B 10/100/1000BaseT Ethernet Test Fixture

TF-USB-B USB 2.0 Compliance Test Fixture