For full functionality of this site it is necessary to enable JavaScript.

Memmert ICP450ecoコンプレッサー冷却式インキュベーター(449L)

  • 生産者:MEMMERT
    Model: ICP450eco
    起源: Germany
    品物を保証します: 12 Month
    • 要件クオート Request a Quotation
  • 連絡先
    • カートへ追加
    • 今すぐ注文
  • 校正検証修理サービスを参照してください

      いい価格のため、連絡しなさい

    ホットライン: (+84) 968060220

    電話番号: +84 (24) 62923267

Volume: approx. 449 liters

Interior dimension: width 1040 x height 720 x depth 600 mm

Exterior dimension: width 1224 x height 1613 x depth 784 mm

Stainless steel grids (standard): 2

Max. number of grids/shelves: 8

Working temperature range: -12 to 60°C (not suitable for long-term storing at sub-zero temperatures. During permanent operation, the glass door may ice over)

Setting accuracy temperature: 0.1°C

2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error

ControlCOCKPIT:TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-colour displays.

German, English, French, Spanish, Polish, Czech, Hungarian language settings available on the ControlCOCKPIT

Timer: Digital backwards counter with target time setting, adjustable from 1 minute to 99 days

Function SetpointWAIT: the process time does not start until the set temperature is reached

Calibration: three freely selectable temperature values

Adjustable parameters: temperature (Celsius or Fahrenheit), fan speed, programme time, time zones

Programme stored in case of power failure

AtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB port

ControlCOCKPIT with USB port for uploading programmes, reading out protocol logs, activating the User-ID function

Displaying of already logged protocol data on the ControlCOCKPIT (max 10,000 values correspond to approx. 1 week)

Interface: Ethernet, USB

Ethernet interface on the rear of the appliance for reading out the protocol log and for uploading programmes and for online logging

PID microprocessor control with integrated auto-diagnostic system

Internal data logger with a storage capacity of at least 10 years

Temperature control: mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 10°C above nominal temperature

Temperature control: over- and undertemperature monitor TWW, protection class 3.3 or adjustable temperature limiter TWB, protection class 2, selectable on display

AutoSAFETY: additionally integrated over and undertemperature protection "ASF", automatically following the setpoint value at a preset tolerance range, alarm in case of over or undertemperature, heating is switched off in case of overtemperature, compressor in case of undertemperature

Autodiagnostic system: for fault analysis

Alarm: visual and acoustic

Air jacket heating system for gentle all-around heating

No drying-up of the load caused by the cooling device due to separation of thermal jacket from interior

Cooling: cooling compressor with climate-neutral refrigerant CO2 (R744), GWP1

Highly efficient automatic defrosting system

Two leaves door: fully insulated stainless steel door with 2-point locking, inner glass door

Structured stainless steel housing, scratch-resistant, robust and durable; rear of zinc-plated steel

Ambient temperature: 15 – 28°C (up to 34°C with limited temperature range)

Humidity: max. 70% rh, non-condensing

Voltage: 230 V, 50/60 Hz

Electrical load: approx. 1200 W

Installation: mounted on lockable castors


Accessories:

+ Stainless steel grid, 2 pcs

+ Calibration certificate for 10°C and 37°C (Memmert supply)

+ Manual

Details

Datasheet 


  • 良質な取り決め
  • オリジナル保証
  • 宅配便
  • 買い取り簡単化

おまけチャンス‐ニュースを受ける登録