SAUTER HBD100-0 デジタル硬度テスター (0~100 H)

0~100HD
•    Typical application: measurement of
penetration (Shore)
•    Particularly recommended for internal comparison
measurement. Standard calibrations
e.g. to DIN 53505 are often not possible
because of very narrow standard tolerances
•    Shore A: rubber, elastomers, neoprene,
silicone, vinyl, soft plastics, felt, leather and
similar material
•    Shore D: plastics, formica, epoxides,
plexiglass etc.
•    Shore A0: foam, sponge etc.
•    Max mode: Holds the maximum value in the
display
•    Point mode: Shows one instant value
•    Can be attached to the test stands SAUTER
TI-AC. (for Shore A and A0),
TI-D. (for Shore D)
•     Delivered in a wooden carrying case