빠른 지원
인증된 전문가에게 직접 연결
인증된 전문가에게 직접 연결
Temperature range: +5℃ to +25℃
Control accuracy(*1): ±2.0 to 3.0℃, Compressor On-Off control
Cooling capacity [kW] (50/60kHz, Circulation temperature at +20℃)(*2): 27.4/29.2
Compressor output, Refrigerant: 7.5kW, R407C
Pumping capacity（50/60kHz)(*3):
Max. discharge pressure [Mpa]: 0.33/0.47
Flow rate [L/min]: 83/140
Motor output [kW]: 1.02/1.69
Safety device/function: Short/Over current breaker, Overload protector, High and Low temperature, Refrigerant high and low pressure, Overheat protector for Compressor, Phase-reversal relay, Overheat protector for Compressor, Low water cut off, Warning indicator lamp
Water bath capacity(at 80% water level): 315L
Required primary cooling water rate [L/min] (cooling water temperature: +25℃/+34℃)(*4): 57/74
Connecting pipe diameter (circulating fluid in/out, primary cooling water in/out): Rc1 1/4, Rc1 1/4
Dimensions: 1107×823×1882 mm
Weight: Ask us
Power Supply／Operation current: AC200V, 50/60Hz/three phase *Ask us for more information.
Catalog
(*1)Performance may not be maintained due to environmental temperature, heat load, circulation pipe distance, etc.
(*2)Capacity when the ambient temperature at below +30℃.
(*3)Capacity when using tap water. Flow rate when the discharge pressure at 0.1 MPa.
(*4)The required cooling water flow increases and decreases by the temperature. Please note that if the flow rate does not increase when the temperature is high, it may cause problems.
•Since the water-cooled type requires primary cooling water for cooling, please make sure the specified flow rate is secured.
•Standard products cannot use pure water as circulating fluid.
•Please ask us when mixing chemicals for water treatment to circulating fluid.
•The fee for Delivery and Installing are quoted separately.
