Anritsu MT1000A 네트워크 마스터 프로
생산업체: ANRITSU Model: MT1000A - 견적요구
- 연락처
MT1000A/MU100010A Network Master Pro Operation Manual
MT1000A/MT1100A remote operation manual
Open source licences
Features
- All-in-one field transport tester – supports testing from 1.5 Mbps to 10 Gbps
- Metro and core networks OTN installation and maintenance
- Carrier Class Ethernet installation and troubleshooting
- Mobile Backhaul installation and verification
- Mobile Fronthaul installation and verification
- Powerful Storage Area Networking (SAN) testing
- Quick and easy testing of SDH/SONET and PDH/DSn networks
- Testing of client signals mapped into OTN
- Easy and intuitive GUI
- Dual port at all rates
- WLAN*/Bluetooth*/LAN connectivity
- PDF, CSV and XML report generation for documenting test results
- Remote operation (VNC), dedicated remote GUI software and remote control (scripting)
Description
Redefining Transport Testing |
|
|
|
Optical Transport Portfolio
All-in-one Field Transport Tester
The compact, battery-powered and easy-to-use MT1000A with 10G Multirate Module MU100010A has everything in a single, handy tester needed to install and maintain communication networks from 1.5 Mbps to 10 Gbps.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
OTN Testing with Client Signals
The MT1000A is a powerful and full toolset for testing OTN signals. It supports complete Bit Error Rate (BER) tests with bulk signals at the OTN level as well as tests all the way to the Ethernet, CPRI, Fibre Channel and SDH/SONET client signals mapped into the OTN signal.
Easy-to-use
The portable, compact, lightweight MT1000A makes network field testing easy. Service engineers can read and interpret data from the tested network directly on the 9-inch color display with easy-to-understand indications and graphical symbols. And the GUI makes it simple to configure and operate the instrument at its full potential.
Dual Port at All Rates
- Reduced test time by testing two lines simultaneously with one unit
- In-service bi-directional troubleshooting
*This device comes with Linux software. The customer has a right to obtain, modify and redistribute the source codes of this software. Please request from "Contact Us" at the top of this page. Please understand that we cannot respond to questions concerning the content of Linux source codes.
Applications
Comprehensive OTN Testing for Metro and Core Networks Installation and Maintenance
Carrier Ethernet Installation and Troubleshooting
Mobile Backhaul Installation and Verification
Mobile Fronthaul Installation and Verification
Powerful Storage Area Networking (SAN) Testing
Quick and Easy Test of SDH/SONET and PDH/DSn Networks
Comprehensive OTN Testing for Metro and Core Networks Installation and Maintenance
The MT1000A supports testing of OTN line at the client signal level with Ethernet, CPRI, Fibre Channel and SDH/SONET signals. The MT1000A can also test OTN lines at the line rate with bulk signals. The user can identify problems at all levels in the OTN signal, solving OTN issues efficiently, reducing system downtime, and reducing operating expenses for network operators.
OTN test features include:
- OTU1, OTU2, OTU1e, OTU2e, OTU1f, OTU2f tests
- ODU0, ODUflex, ODU1 and ODU2 including ODU0 to ODU2 multistage mapping
- OTN tests with bulk signals at OTN level
- Comprehensive OTN error and alarm statistics
- OTN error performance measurement in accordance with G.8201 or M.2401
- ITU-T O.182-compliant FEC test
- Test of Ethernet, CPRI, Fibre Channel or SDH/SONET client signals mapped into OTN signal
- Delay measurement
- OTN header edit and capture
- OTN TCM monitoring and generation
- Service disruption analysis using APS application
- OTN tributary scan
- Full flexibility to monitor insert/overwrite client overhead and payload within OTN signal
Carrier Ethernet Installation and Troubleshooting
The MT1000A is a comprehensive solution for easy testing, installing, and faster troubleshooting of Ethernet lines up to 10 Gbps which can help lower operating costs such as cutting additional truck rolls, tech support calls, and customer churn to improve operating expenses.
Ethernet test features include:
- Ethernet tests at 10 Gbps, 1 Gbps, 100 Mbps and 10 Mbps
- Traffic generation up to full line rate
- Support for IPv4 and IPv6
- Ethernet Service Activation Test (Y.1564)
- Automated RFC 2544 tests of Throughput, Frame Loss, Latency or Packet Jitter and Burstability
- TCP Throughput option (RFC 6349)
- BER tests – include Frame Loss and Sequence Error tests
- Service disruption measurements
- Comprehensive statistics
- Filters – to extract relevant parts of traffic
- Thresholds – to highlight abnormalities
- Simultaneous monitoring in both line directions
- IP Channel Statistics to identify error streams, top talkers, network attacks
- Ethernet OAM tests
- 10G WAN-PHY tests
- Synchronous Ethernet test (ITU-T G.826x and IEEE 1588 v2)
- Ethernet Multistream
- Stacked VLAN (Q-in-Q)
- MPLS tests
- MPLS-TP and PBB tests
- Ping
- Traceroute
- Frame capture for protocol analysis with Wireshark
- Electrical cable tests and optical signal level displays
Mobile Backhaul Installation and Verification
The MT1000A supports Synchronous Ethernet testing and analysis of both Synchronous Ethernet technologies: SyncE (ITU-T G.826x), and PTP (IEEE 1588 v2). The user can quickly identify problems at all levels in Synchronous Ethernet, solving issues quickly, reducing system downtime and customer churn, and improving operating expenses for mobile operators.
Mobile Backhaul test features include:
- Test and analysis of Synchronous Ethernet:
- SyncE (ITU-T G.826x)
- PTP (IEEE 1588 v2)
- G.8265.1 and IEEE 1588 v2 profile for telecommunication
- Synchronous Ethernet run together with normal Ethernet functions including:
- Ethernet tests at 10 Gbps, 1 Gbps, 100 Mbps and 10 Mbps
- Ethernet Service Activation Test (Y.1564)
- Automated RFC 2544 tests of Throughput, Frame Loss, Latency or Packet Jitter and Burstability
- BER tests – include Frame Loss and Sequence Error tests
- Service disruption measurements
Mobile Fronthaul Installation and Verification
The MT1000A supports from CPRI interface rate option 1 (614.4 Mbps) to option 8 (10.1376 Gbps) and OBSAI from 768 Mbps to 6.144 Gbps, ensuring tests for all current and future requirements.
Mobile Fronthaul test features include:
- CPRI/OBSAI L1 test
- CPRI L2 test
- Pass-through monitoring
- CPRI over OTN
Powerful Storage Area Networking (SAN) Testing
The MT1000A is the perfect tool for deploying Fibre Channel up to 10 Gbps and also supports OTN, Ethernet, CPRI/OBSAI, SDH/SONET and PDH/DSn. The MT1000A gives the user less equipment to maintain and learn, helping reduce operating expenses.
Fibre Channel test features include:
- 1GFC, 2GFC, 4GFC, 8GFC, and 10GFC tests
- Optional mapping to OTN
- Latency measurement
- BER tests including service disruption measurement
- Line alarm and error monitor
- Normal or Reflector mode
Quick and Easy Tests of SDH/SONET and PDH/DSn Networks
The MT1000A is a powerful and easy-to-use tool for testing SDH/SONET. PDH/DSn systems can be tested directly or embedded into SDH/SONET. The MT1000A can support new and legacy technologies, leaving the user less equipment to maintain and learn, and reducing operating expenses.
SDH/SONET and PDH/DSn test features include:
- Powerful testing of SDH (STM-64, STM-16, STM-4, STM-1), SONET (OC-192, OC-48, OC-12, OC-3, STS-3) systems and embedded PDH (E1, E3, E4) and DSn (DS1, DS3) systems
- Powerful testing of PDH (E1, E3, E4) and DSn (DS1, DS3) systems
- Simultaneous bi-directional monitoring of SDH/SONET and PDH/DSn lines
- SDH/SONET mapping and de-mapping of PDH/DSn signals
- Comprehensive error and alarm statistics
- SDH/SONET overhead byte testing and monitoring
- SDH/SONET tributary scan
- SDH/SONET pointer event generation and monitoring
- SDH/SONET and PDH/DSn delay measurements
- Analysis of service disruption with APS application
- 품질 보증
- 공인 보증
- 집으로 배달
- 간단하게 거래하기