For full functionality of this site it is necessary to enable JavaScript.

Uni FG-8110 스윕 함수 발생기 (10Mhz)

Frequency Range: 10MHz
Waveform types:Sine, Square, Triangle, Ramp, Pulse, Sawtooth,TTL Leveled Square, DC
Output :20Vp-p
Frequency Counter: 200mHz to 110MHz
Display: 7digit Green LED, Overflow, Gate time, MHz, kHz, Hz, mHz,
Power: 115 or /230 VAC ± 10%, 48 to 66Hz 
Dimensions and weight:240(W) X 270(D) X 90(H)mm;3kg
Standard Accessories: Power Cord, BNC Cable, Fuse, Instruction Manual

Details
- 4-in-1 Sweep, Function & Pulse Generator and Frequency Counter
- Versatile waveforms for Sine, Square, Triangle, Ramp, Pulse, Sawtooth and DC outputs
- 0.1 Hz to 10 MHz Frequency Out put in 7 Ranges
- Built in 7digits External Counter Display measuring up to 110MHz
- Internal and External linear Sweep control from 1:1 to 100:1
- Variable Symmetry for generating Sawtooth and Pulse waveforms
- TTL leveled Square waveform output
- Variable DC Offset control
- Variable Output level control with 20 dB Attenuator and Amplitude control
Specification
 
 
 
Function   Specification
 
Output
Characteristic
Waveforms Sine, Square, Triangle, Ramp, Pulse, Sawtooth,
TTL Leveled Square, DC
   
Frequency Range 0.1Hz to 10MHz in 7 Range (1,10,100,1K,10K,100K,1M)
   
Frequency Accuracy ± 5% of full scale
   
Output Level 20Vp-p in open circuit, 10Vp-p into 50Ω Load
   
DC Offset Control More than +/-5V (into 50ohm)
   
Output Impedance 50Ω±5%
   
Attenuator -20dB fixed and continuously variable
     
Waveform
Characteristics
Sine wave Flatness : ±0.3dB to 10MHz
Distortion : Less than 1% at 0.1Hz to 100KHz
   
Square wave Rise and Fall time : Less than 25nSec
   
Triangle wave Linearity : More than 99% at 0.1Hz to 100 kHz
   
TTL Output Rise and Fall time : Less than 25nSec
Output Level :TTL Level ( H ; Higher than 2.4V, L ; Lower than 0.4V)
   
Symmetry Variation 1 :1 to 10 : 1
     
Sweep Function
Characteristic
Mode Linear
   
Width Variable from 1 :1 to 100 : 1
   
Rate 0.5Hz to 50Hz(20mSec to 2Sec)
   
External VCF Input Input Voltage 0 to 10V
Input Impedance : Approx. 10 kohm
     
Frequency Counter
Characteristic
Display 7digit Green LED, Overflow, Gate time, MHz, kHz, Hz, mHz,
   
Frequency Range 200mHz to 110MHz with Auto Range
   
Accuracy +/- Timebase Error+/- 1Count
   
Low pass Filter -3dB, 100kHz
   
Input Sensitivity 100mVrms
   
Time base 10MHz Crystal, 20ppm
   
Max. Input Voltage 250Vpp
     
General Power Requirement 115 or /230 VAC ± 10%, 48 to 66Hz
 
   
Operating Temperature 0 to 50℃ (Accuracy specified at 25 ± 5℃)
   
Dimension 240(W) X 270(D) X 90(H)mm
   
Weight Approx. 3 kg
   
Standard Accessories Power Cord, BNC Cable, Fuse, Instruction Manual
     
 
  • 품질 보증
  • 공인 보증
  • 집으로 배달
  • 간단하게 거래하기

할인과 정보를 받기 위해 등록하기