emin

LeCroy WaveAce 2012 Máy hiện sóng số (100 MHz, 1 GS/s, 2 kênh)

  • Cam kết chất lượng
  • Bảo hành chính hãng
  • Giao hàng tận nơi
  • Đơn giản hóa giao dịch

Hãng sản xuất: Teledyne LeCroy - USA

Model: WaveAce 2012

Vertical System

Bandwidth 100 MHz
Rise time 3.5 ns
Input Channels 2
Bandwidth Limiters 20 MHz
Input Impedance 1 MΩ ± 2% || 18 pF ± 3 pF
Input Coupling AC, DC, GND
Maximum Input Voltage ± 400 Vpk
Channel-Channel Isolation ≥ 100:1 at 100 MHz
Vertical Resolution 8 bits
Sensitivity 2 mV/div - 5 V/div
DC Gain Accuracy ±3%: 5 mV/div - 5 V/div (fixed gain ranges)
±4%: 2mV/div and variable gain ranges
Offset Range ±800mV: 2mV/div - 200 mV/div
±40V: 206 mV/div - 5 V/div
 

Horizontal System

Time/Division Range 2.5 ns/div - 50 s/div
Clock Accuracy 100 ppm
Trigger and Interpolator Jitter .5 ns (pk-pk)
 

Acquisition System

Single-Shot Sample Rate/Ch 2 GS/s on 1 Ch
1 GS/s on 2 Ch
Equivalent Sample Rate 50 GS/s
Memory 24 kpts/Ch on 1 Ch
12 kpts/ch on 2 Ch
 

Acquisition Modes

Averaging Selectable Number of Sweeps:
4, 16, 32, 64, 128, 256
Peak Detect 2.5 ns
Interpolation Linear, Sin x/x
Enhanced Resolution na
Sequence Mode na
 

Triggering System

Modes Normal, Auto, Single, Stop
Sources Ch 1 - Ch 2, EXT, EXT/5, AC Line
Coupling Mode AC, DC, LF Rej, HF Rej,
Pre-trigger Delay memory/(2 * sample rate)
Post-trigger Delay 260 Divisions
Hold-off by Time or Events 100 ns - 1.5 s
Internal Trigger Range ±6 divisions from center
Trigger Sensitivity 1 division: DC - 10 MHz
1.5 divisions: 10 MHz - 100 MHz
External Trigger Sensitivity Ext: 200 mVpp from DC to 10 MHz
300 mVpp from 10 MHz to 100 MHz
Ext/5: 1Vpp from DC to 10 MHz
1.5 mVpp from 10 MHz to 100 MHz
External Trigger Input Range Ext: ±1.2 V, EXT/5: ±6 V
 

Display

Type Color 7.0 TFT-LCD
Resolution Wide QVGA; 480 x 234 pixels
Grid Styles YT (18 horizontal divisions), XY
 

Trigger Types

Optional Advanced Triggers na
Optional Serial Data Triggers na
 

Internal Storage

Waveform Storage 20 waveforms and 2 reference waveforms
Setup Storage 20 setups
 

Math

Number of Math Traces 1
Standard Math Functions Add, Subtract, Multiply, Divide, FFT
Optional Math Functions na
 

Measurements

Number of Measurements Displayed 5
Measurement Parameters Amplitude, Average, Base, Burst Width, Cyclical RMS, +Duty Cycle, -Duty Cycle, Fall Time, Frequency, Max, Mean, Min, Overshoot, Peak-Peak, Period, Phase, Preshoot, Rise Time, RMS, Top, +Width, -Width, First Rising-Rising, First Rising-Falling, First Falling-Rising, First Falling-Falling, Last Rising-Rising, Last Rising-Falling, Last Falling-Rising, Last Falling-Falling
 

Probes

Probes Qty. (2) ÷10/1 Passive Probes
Scale Factors Manual: ÷1, ÷10, ÷100, ÷1000
Calibration Output 1 kHz square wave, 3Vp-p (typical), output to probe hook
 

Interface

GPIB Port (optional) na
USB (Device) 1
Ethernet Port 1
USB (Host) 1
Serial Port na
 

Power Requirements

Voltage 100 - 240 VAC, 45 Hz to 440 Hz
Max. Power Consumption 50 VA
 

Environmental and Safety

Temperature (Operating) 10 °C to 40 °C
Temperature (Non-Operating) -20 °C to 60 °C
Humidity (Operating) 85% RH, 40 °C
Humidity (Non-Operating) 85% RH, 65 °C
Altitude (Operating) 3000 m
Altitude (Non-Operating) 15,266 m
 

Physical Dimensions

Dimensions (HWD) 163 mm x 360 mm x 124.1 mm
(6.42 x 14.17 x 4.89)
Weight 3.33 kg (7.4 lbs)
 

Warranty and Service

Warranty and Service 3-year warranty; calibration recommended annually. Optional service programs include extended warranty and calibration services.


Đăng ký nhận bản tin - cơ hội nhận khuyến mãi