ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ
Indenter: Micro Vickers diamond indenter
Indenting force: 20N (Approx. 2kgf)
Measuring range:
Vickers hardness: 100 - 1000HV
Rockwell C hardness: 10.0 - 70.0HRC
Rockwell B hardness: 60.0 - 100.0HRB
Shore hardness: 20.0 - 100.0HS
Brinell hardness: 85 - 550HBW
Reproducibitity:
Vickers hardness: ± (3%rdg)HV
Rockwell C hardness: ±1.0HRC
Rockwell B hardness: ±2.0HRB
Shore hardness: ±1.0HS
Brinell hardness: ± (3%rdg)HBW
Nonlinearity: 200 to 1000HV ± (5%rdg)HV (Measuring on standard hardness block)
Allowable measuring angle: Within 3%
Display:
Scale conversion: HV, HRC, HRB, HS, HBW, 1N/mm²
Display of measured value: 4 disits
Unit of digital display1: HV, 0.1HRC, 0.1HRB, 0.1HS, 1HBW, 1N/mm²
Power supply: AC adapter (100-240V), or rechargeable lithium ion battery
Operating temperarure: 0 - 50 C°
Dimensions:
Display unit: 97mm(W)×170mm(H)×50mm(D)
Probe head diameter:
20mm (With grip)
8mm (Without grip)
Probe length: 195mm
Carrying case: 389mm (W)×132mm (H)×200mm (D)
Mass:
Display unit: Approx. 405g
Probe: Approx. 270g
Data memory: 200 data
Output: Data output in ASCII code from RS-232C socket
Standard configuration:
1 Display unit
1 Probe (with grip)
1 Probe cable (1.5m)
1 Hardness standard block: around 55HRC, (For SH-22-S005: around 600HV)
1 AC adapter
1 Recharger
1 Lithium ion battery
1 Carrying case
1 Instruction manual
1 test report
1 guarantee card
Options:
Standard hardness block around HV600 (included in standard configuration of SH-22-S005)/around 50HS/around 300HBW
Measuring stand (SH-P07)
Thermal printer (DPU-S245, with connecting cable)
Printer paper in roll
Stand for main unit (SH-P03)
Grip*³, Nosepiece for narrower area
