Acute TL4134B ຕົວວິເຄາະເຫດຜົນ TravelLogic (34 channels, 250MHz; 4Gb)
Power Source: USB bus-power (+5V)
Static Power Consumption: 0.8W
Max Power Consumption: 3W
Hardware Interface: USB 3.0
Timing Analysis (Asynchronous，Max. Sample Rate): 2GHz
State Clock Rate (Synchronous，External Clock): 250MHz
Storage: Conventional Timing, Transitional Timing
Channels: 34
Total Memory: 4Gb
Timing Analysis: Available Chs (Conventional / Transitional Timing) - Memory per Ch
4GHz Timing [Available Chs] - Memory per Ch
2GHz Timing [Available Chs] - Memory per Ch: [8/7]-512Mb
1GHz Timing [Available Chs] - Memory per Ch: [16/14]-256Mb
500MHz Timing [Available Chs] - Memory per Ch: [32/28]-128Mb
250MHz Timing [Available Chs] - Memory per Ch: [32/32]-128Mb
Channel to channel skew: < 1ns
Input channels: N/A
Input impedance: 200KΩ//<7pF
Max. (Non-destructive): ±30V DC, 12Vpp AC
Input operation: ±10V
Input sensitivity: 0.25Vpp @50MHz, 0.5Vpp @150MHz, 0.8Vpp @250MHz
Threshold group: 4 (ch0~7, ch8~15 & clk0, ch16~23, ch24~31 & clk1)
Threshold range: ±5V
Threshold resolution: 50mV
Threshold accuracy: ±100mV + 5%*Vth
Trigger resolution: 500ps
Trigger types: Channel, Pattern, Single / Multi Level, Width, Time-out, Setup / Hold Timing Violation, External, Manual
Protocol Trigger:
BiSS-C, CAN2.0B/CAN FD, DALI, DP_Aux, HID over I2C, I2C, I2S, LIN2.2, LPC, MDIO, Mini/Micro LED, MIPI I3C 1.1, MIPI RFFE 3, MIPI SPMI 2, Modbus, PMBus, Profibus, PWM, SENT, SMBus, SPI, SVI2, UART (RS232), USB PD 3, USB1.1
Protocol Analyzer:
BiSS-C, CAN2.0B/CAN FD, DALI, DP_Aux, HID over I2C, I2C, I2S, LIN2.2, MDIO, MIPI I3C 1.1, MIPI RFFE 3, Modbus, PMBus, Profibus, PWM, SMBus, SPI, UART (RS232), USB PD 3, USB1.1
ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ