ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ
Measuring Principle: UV254 ultraviolet absorption method
Optical distance：2.5mm
Measuring Range(COD): 1~1500mg/L
Resolution(COD): 0.01mg/L
Accuracy (COD): ±5% F.S. equiv.KHP
Measuring Range(TOC): 0.4 ~600mg/L
Accuracy(TOC): ±5% F.S. equiv.KHP
Resolution(TOC): 0.01mg/L
Measuring Range(TU): 0~500NTU
Accuracy(TU): ±5% F.S. Take the largerone
Resolution(TU): 0.01NTU
Operating Temperature: 0 ~ 50℃(without freezing)
Electric Wire: 5m (Standard)
Calibration: 1 or 2-point calibration
waterproof level：IP68
Working Pressure: 3Bar
Response Time: T90 max. 10s
Flow Rate: < 3 m/s
Power: DC 12V-24V, current <50mA (without cleaning brush)
Output: RS485, Modbus RTU protocol
Materials：POM and 316L (Titanium can be customized)
Pleasebe note:
1) The COD and TOC value can be measured directly.
2) BOD data calculated base on measured COD data through the conversion factor.(Conversion factor model need be build by end user and need used together with our controller.)
3) COD sensor with turbidity compensation:The measured turbidity value which is mainly used to compensate for COD measurement, and the turbidity value not recommended to be used as measurement data directly
