Global Technology Supply and Demand Connection Point.

**EMIN at Global Technology Supply and Demand Connection Point.** On March 31, 2017, in Hanoi, the Ministry of Science and Technology (MOST) in collaboration

EMIN at Global Technology Supply and Demand Connection Point.

On March 31, 2017, in Hanoi, the Ministry of Science and Technology (MOST) in collaboration with the Ministry of Agriculture and Rural Development (MARD) and Korea's Small and Medium Business Administration (SMBA) opened Global Technology Supply and Demand Connection Point and Vietnam - Korea Technology Exchange Center (VKTEC).

Attending the Opening Ceremony, on the Vietnamese side, there were Deputy Minister of Science and Technology-Tran Van Tung, General Director of Technological Development and Application Agency-Ta Viet Dung, Director of Agricultural Engineering and Post-Harvest Technology Institute-Pham Anh Tuan; Representatives of local ministries, branches, research institutes, universities, Sciences & Technology Advanced Application centers, Technology Transfer Intermediaries, domestic enterprises. On behalf of Korea, there were Minister of Small and Medium Business Administration (SMBA)- Joo Young Sup, Minister of INNOBIZ- Sung Myung Ki. Attending the opening ceremony were representatives of other foreign companies.

Here are some images of EMIN at Global Technology Supply and Demand Connection Point.

ຂ່າວທີ່ກ່ຽວຂ້ອງ

17/08/y 13:45:30

Inserting a Type K Thermocouple Too Shallow Can Cause Measurement Errors

When selecting a Type K temperature probe for a pipe or tank, the measurement location, insertion depth, and heat-transfer conditions should be determined in advance. Even a Type K thermocouple with good accuracy can produce inaccurate readings if it is not installed correctly for the temperature zone being monitored.

17/08/y 10:55:50

Is a dedicated meter required to measure currents in the range of a few microamperes (µA)?

A multimeter can measure currents in the microampere (µA) range, but the reading captures only a momentary value. When is a DMM sufficient, and when is a specialized current meter required?

17/08/y 09:27:28

Đừng vội báo giá ngay khi khách hàng đưa ra yêu cầu! Vì sao? Chia sẻ từ Best Sale EMIN

Vì đúng mẫu máy chưa chắc đã đúng nhu cầu. Bán một chiếc máy hiện sóng là đưa khách hàng một thiết bị, còn tư vấn đúng chiếc máy để tìm ra căn nguyên vấn đề của họ mới là phần việc thật sự của một người bán hàng kỹ thuật. Có lẽ đó cũng là lý do giúp anh Bảo giữ vị trí Best Sale EMIN Group năm 2025, không chỉ nhờ hiểu khách hàng, mà còn nhờ vốn kiến thức sâu về những sản phẩm Tektronix mà EMIN đang phân phối.

17/08/y 09:24:21

The Thinner the Type K Thermocouple, the Faster the Temperature Response

Ultra-thin probes are suitable for measurements that require a fast response, but they generally have lower mechanical strength. Thin wires are more likely to bend or break when exposed to vibration, impact, or strong material flow.

15/08/y 09:22:39

Measure the board's current consumption in standby mode

A circuit board may function normally yet still consume significant power in standby mode. Particularly in IoT devices, wireless sensors, battery-operated equipment, or low-power control circuits, a difference of just a few microamperes in sleep current can significantly impact battery life