ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ
Thermal Imaging
- Thermal Imaging Detector: FLIR Lepton microbolometer
- Image Calibration: Automatic with manual lock scale option
- Thermal Image Resolution: 4800 pixels (80 × 60)
- Spectral Response: 8–14 μm
- Field of View: 51° × 38°
- Sensitivity: < 150mK
- Detection Limit(Wet Area Detection @ 32ft (10m): 19.7in2 (49cm2)
- Image Frame Rate: 9 Hz
- Thermal Image Palettes: Iron, Rainbow, Ice, Greyscale
- Minimum Focus Distance: 10 cm (4”)
Moisture Measurement
- Pin Moisture: 7% to 30%; ±1.5% MC
30% to 100%: Reference only
- Pin Moisture Groups: 9 material groups
- Pinless Moisture Range: 0 to 100: Relative
- Pinless Measurement Depth: 0.75" (19mm) Max
- Measurement Resolution: 0.1
- Response Time Pinless: 100 ms
- Response Time Pin Mode: 750 ms
Environmental Measurement
- Relative Humidity: 0 to 100%; 2.5%RH
- Air Temperature: 32 to 122°F (0 to 50°C); ±1.1°F (±0.6°C)
- Dew Point: -22 to 122°F (-30 to 50°C); ±1.8°F (±1.0°C)
- Vapor Pressure: 0.0 to 12.0kPa; ±0.05kPa
- Mixing Ratio: 0 to 560GPP (0.0 to 80.0 g/kg); ±2GPP (0.25 g/kg)
General Information
- Display Type: QVGA (320 × 240 pixel) 2.3” color TFT graphical display
- Saved Image File format: BMP with measurement values overlaid
- Stored Image Capacity: 9999 images
- Laser Orientation: Single laser pointer to center of thermal image
- Continuous Run Time: 18 hours max
- Typical Usage: 4 work weeks
- Battery: 3.7V, 3000mAh Li-ion rechargeable via micro USB
- Certification Standards: EN 61326 (EMC), EN 60825-1 Class 2 (Laser)
- Agency Approvals: CE, FCC Class B
Unit included
- Imaging Moisture Meter
- FLIR MR01 Replaceable Temperature and Relative Humidity Sensor
- FLIR MR02 Standard Pin Probe
- Quick Start Guide
- International USB Charger
- USB Cable
Optional Accessories
- FLIR MR-PINS2 - 2" pins, 1 pair
- FLIR MR-PINS4 - 4" pins, 1 pair
- FLIR MR-PINS6 - 6" pins, 1 pair
- FLIR MR-PINS2-10 - 2" pins, 10 pair
- FLIR MR01 - Replaceable T/RH Probe
- FLIR MR02 - Replaceable External Moisture Pin Probe
- FLIR MR04 - Extension Pole
- FLIR MR05 - Impact Pin Probe
- FLIR MR06 - Wall Cavity Probe
- FLIR MR07 - Hammer Probe
- FLIR MR08 - Hammer and Wall Cavity Combo Probe
- FLIR MR09 - Baseboard Probe
- FLIR MR10 - EVA Protective Case
