Fluke Network DSX2-5000-NW AP Cable Analyzer (1GHZ, Non-wireless)

Cable Types

Shielded and unshielded pair LAN cabling: TIA Category 3, 4, 5, 5e, 6, 6A, 8: 100 Ω ISO/IEC Class C, D, E, EA, F, FA and I/II: 100 Ω and 120 Ω

Standard Link Interface Adapters

Permanent link adapters

Plug type: shielded RJ45

Optional Plug type: Tera

Channel Adapters

Jack type: shielded RJ45

Optional Jack type: Tera, GG45

Test Standards

TIA: Category 3, 4, 5, 5e, 6, 6A, 8 per ANSI/TIA-568.2-D

ISO/IEC: Class C and D, E, EA, F, FA and I/II certification per ISO/IEC

Maximum frequency: 1000 MHz

General Specifications

Speed of Autotest: Full 2-way Autotest of Category 5e or 6/Class D or E: 9 seconds. Full 2-way Autotest of Category 6A/Class EA: 10 seconds

Input protection: Protected against continuous telco voltages and 100 mA over-current. Occasional ISDN over-voltages will not cause damage

Display: 5.7 in LCD display with a projected capacitance touchscreen

Case: High impact plastic with shock absorbing overmold

Dimensions: Main Versiv unit with DSX module and battery installed: 2.625 in x 5.25 in x 11.0 in (6.67 cm x 13.33 cm x 27.94 cm)

Weight: Main Versiv unit with DSX module and battery installed: 3 lbs, 5oz (1.28 kg)

Main unit and remote: Lithium ion battery pack, 7.2 V

Typical battery life:8 hours

Charge time*

Tester off: 4 hours to charge from 10 % capacity to 90 % capacity.

Languages supported: English, French, German, Italian, Japanese, Portuguese, Spanish, Chinese, Korean, Russian, Trad Chinese, Czech, Polish, Swedish, Hungarian

Calibration: Service center calibration period is 1 year

Delay Skew

Range: 0 ns to 100 ns

Resolution: 1 ns

Accuracy: ± 10 ns

DC Loop Resistance Test

Range: 0 Ω to 540 Ω

Resolution: 0.1 Ω

Accuracy: ± (1 Ω + 1 %)

Overload recovery time

Less than 10 minutes to rated accuracy following an overvoltage. Referencing is required after repeated or prolonged overvoltage.

Datasheet