For full functionality of this site it is necessary to enable JavaScript.
EMIN.VN
0
Product image

FUZRR ES1010 ເຄື່ອງທົດສອບອັດຕາສ່ວນແຮງດັນໄຟຟ້າ H/L ແບບໄຮ້ສາຍ (0.0mA-1200A, 0.0mA -20A)

ຕິດຕໍ່
ການຊຳລະເງິນທີ່ປອດໄພ
ການຮັບປະກັນຄຸນນະພາບ
ປ່ຽນ ແລະ ສົ່ງຄືນງ່າຍ
ມີບໍລິການຈັດສົ່ງ

High voltage detector

Range: 0.0mA 1200A (50/60Hz automatic)

Resolution: 0.1mA

Clamp Diameter: $50mm

Test Accuracy: +2%±5dgt

Power: DC6V 7# Alkaline battery ( 1.5V AAAx4)

Meter Dimension: W/T/H: 87*37*262mm

 

Host (current clamp)

Range: 0.0mA ~ 20A

Resolution: 0.1mA

Clamp Diameter: $7.5mm

Test Accuracy: ±0.5%±5dgt

Power: DC7.5V 5 # Alkaline battery ( 1.5V LR6×5)

Meter Dimension

Host: W/T/H:100*35*204mm

Current clamp: W/T/H: 42*20*137mm

Sampling Speed: 2 times/second

Function: High-low voltage current transformer primary and secondary loop current, transformation ratio, polarity, phase, and on-line test; current and voltage ratio on both sides of transformer; on-line test; load current test Wireless transmission, straight line transmission distance 30m Automatic shift

Transmission type: Wireless transmission, linear transmission distance 30m

Shift gear: Fully automatic shift

Test mod: Clamp CT

Display mode: LCD: 128dots*64dots Blue screen backlight function, suitable for dark places

Ratio: Three kinds of transformation ratio display: (The primary and secondary circuit actually measured the current transformation ratio; the conversion ratio of the secondary circuit 5A; 10kV-YY transformer conversion ratio of 10kV/380V), the maximum ratio of 1:10 million

Line voltage: Line test with insulation sheath below 60kV or bare wire current test below 35kV (must operate with insulation rod)

Lead wire length: The lead wire of the current clamp 2 meter

Weight: Total weight of instrument: 3.1Kg (including insulation rob and instrument bag), High voltage detector: 370g (including battery), Host: 409g (including battery), Current clamp: 180g

Data interface: USB transmission

No signal instruction: "NO SIGNAL" is displayed when the host does not receive the transmission signal

Insulated rod: Five section insulation rods (5 meters in total)

Insulation strength: AC 60kV/rms

Line test: Line test with insulation sheath below 60kV or bare wire current test below 35kV (operate with insulation rod)

Datasheet


Catalog


ຕິດຕາມຂ່າວສານ ແລະ ຂໍ້ສະເໜີ

ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.

ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.

ການຊ່ວຍເຫຼືໍາດ່ວນ

ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ