FUZRR ES7060 ເຄື່ອງມືລະບຸສາຍໄຟທີ່ມີຊີວິດອັດສະລິຍະ
Transmitter technical specification
Function: Outputs composite pulse width frequency signal, signal coupling output, signal direct connection output, displays output voltage, output current, loop impedance, remaining battery voltage, and dynamic indication of launch status
Power supply: 9.6V/6Ah lithium battery, fully charged, continuous working for about 8 hours (at 3rd gear output)
Output method: Automatic identification, caliper coupling when powered on; direct output when power off
Frequency: 6 adjustable: 640Hz, 1.28KHz, 2.56KHz, 3.84KHz, 6.50KHz, 8.05KHz
Output interface: Waterproof aviation socket
Output power: Maximum 15W, 5 levels adjustable, automatic real-time impedance matching
Human-computer interaction: Physical buttons, capacitive screen touch, gesture recognition
Automatic shut-down: It will automatically shut down after 30 minutes of no operation or output. The time can be set.
Automatic standby: Yes, by default, the screen brightness will be automatically reduced after 5 minutes of inactivity to save power. The time can be set.
External voltage detection: Yes, up to 150V
Charging interface: Round charging interface, DC logo
Charger: 11 V/2A DC charger
Fixture update: Yes, update via USB
Transmitter size: 275mm × 226mm × 150mm
LCD size: Length and width 120 mm × 70 mm; display area 110 mm × 62 mm
Weight: The transmitter is about 2.28 kg; the transmitter clamp is about 1.12 m; the direct-connect test clamp is about 170g, and the total mass is about 4.44kg
Pressure resistant: AC 3,700V/rms (in front of the top and bottom of the instrument box)
Electromagnetic properties: IEC61326(EMC)
Reference safety regulations: IEC61010-1 (CAT III 300V, CAT IV 150V, pollution level 2)
IP: IP45
Receiver technical specification
Function: Live cable identification, power outage cable identification, single-core cable identification, with FHD algorithm
Power supply: 8.4V/2,500mAh Rechargeable lithium battery, USB charging interface, full power continuous operation for about 6 hours
Receive frequency: 6 types: 640Hz, 1.28KHz, 2.56KHz, 3.84KHz, 6.50KHz, 8.05KHz
Gain: 5th gear
Unique identification: Yes, the target cable display ( √ )
Filter mode: Hardware filtering + DSP digital filtering
FHD algorithm: Support, instrument direct results, greatly reduce the use requirements of field personnel
Calibration quantity: Number of calibratable cables: 1~20
Identification condition: Current: the current percentage of the received signal and the transmitted signal is between the calibration value 70%-130%, which is one of the conditions for successful identification.
Signal encoding: the receiver decodes and identifies it through an algorithm, and consistency with the transmitter output encoding is one of the conditions for successful identification.
Signal phase: the receiver extracts the phase through an algorithm, and the comparison with the calibration value < 50° is one of the conditions for successful identification.
Current direction: the receiver determines the direction of the current signal, and if it is consistent with the calibration value, it is one of the components of successful identification.
Display mode: 3.5-inch true color LCD screen display, color icon indication
Receiver size: 172mm × 106mm × 42mm
Flexible current clamp: Internal diameter: φ200mm Signal line length: 3 m
Examination range: Power outage identification: The coil can detect a composite pulse width frequency signal with a loop resistance of 0Ω ~ 30kΩ; it can generally reach a cable length of more than 20 kilometers, which is mainly determined by the cable grounding resistance and cable resistance.
Live identification: The coil can detect pulse signals with a loop resistance of 0Ω to 200Ω; when the detection loop resistance is 200Ω, the cable length can generally be 0-10 kilometers.
Signal sampling rate: Adaptation for different frequency sampling rates, Max 819.2KHz
Result display period: About 2 times/second
Automatic shut-down: 30 minutes of no operation and or input, the meter automatically shuts down to save power. When the battery level is too low, the instrument will be shut down.
Charger: 5V Charger
Receiver quality: Flexible current clamp 112g; Receiver 405g (with battery)
Withstand voltage: AC2,000V/rms (Before the front and rear ends of the enclosure)
ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ