GEO Calibration HygroMatic II ຫ້ອງຄວບຄຸມຄວາມຊຸ່ມຊື່ນ ແລະອຸນຫະພູມ (18 °C ~ 28 °C, 80 % RH)
Operating ambient condition
Temperature: 18 °C to 28 °C
Humidity: Up to 80 % RH
Storage conditions
Temperature: -20 °C to 50 °C
Humidity: 0 % to 95 % RH (non-condensing)
Altitude : 2000 m
Calibatrion system accuracy
Temperature : ± 0.10 °C Or Better Typically ± 0.05 °C Based on Probe Accuracy
Humidity : ± 1.00 % RH Or Better Specially tuned systems can be as good as ± 0.60 % Based on Probe Accuracy
Controller type : PID Controller
Uniformity
Temperature: 0.10 °C Or Better Typically ± 0.05 °C
Humidity : 0.30 % RH @ 18 °C to 28 °C Or Better Typically ± 0.25 %
Stability
Temperature: 0.05 °C
Humidity: 0.15 % RH @ 18 °C to 28 °C
Warm-up period
Ambient conditions: 30 Minutes Maximum
Cold: 30 Minutes
Resolution
Display
Temperature : 0.01 °C
Humidity : 0.01 % RH
Dew Point : 0.01 °C (Calculated)
USB
Temperature : 0.01 °C
Humidity: 0.01 % RH
Ramp/soak rate of change
Depends on ambient and desiccant conditions
Temperature
High → Low 1.50 °C / minute Typical
Low → High 5.00 °C / minute Typical
Humidity
High → Low 5.00 % RH / minute Typical
Low → High 10.00 % RH / minute Typical
Control range
Temperature 2 °C to 58 °C
Humidity @ 18°C 2% to 98 % RH
Humidity @ 35°C 5 % to 80 % RH
Humidity @ 23°C 2 % to 58% RH
Humidity @ 40°C 5 % to 75 % RH
Humidity @ 30°C 2 % to 58 % RH
Humidity @ 50°C 5 % to 60 % RH
ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ