ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ
Specification:
+ Power: AC, 47~63HZ, 220V, ±10%
+ Display: 7’ TFT LCD
+ File: 10 groups
Hi-Pot Test:
+ Output volt.: 5kVAC (max)
+ Output Rating: 10mA (max)
+ Output Frequency: 50HZ/60HZ (User selectable)
+ Output Waveform: Sine Wave, THD: Less than 2% at 300Vrms or higher voltage (Resistive Load), Crest Factor = 1.3~1.5
+ Voltage ratio: ±(1% Setting+5V), No load to full load
+ AC/DC Setting: 0.2~5kV, Accuracy: ±(2% Setting +5V)
+ DC Current, mA setting: 0~10mA, Accuracy:±(2% Reading+2Counts)
+ Test time: Range: 0.1~999.9s, 0.1s/Step
Insulation Test:
+ Output volt.: 1KVDC (max)
+ AC/DC Setting: 0.2~1kV, Accuracy: ± (2% Setting +5V)
+ Insulation setting:
1M~1000M; Accuracy: ±(2% Reading+2Counts)
1000M~9999M, Accuracy: ±(7% Reading+2Counts)
+ Test time: Range: 0.1~999.9s, 0.1s/Step
Polarity Test:
+ Volt.: 5VDC
+ Open/short: 1KΩ
+ LN Polarity Test: To set
+ Cable type: Single/Normal, Optional
Arcing: Setting Range: 1~9; 0=off
Decision mode:
+ NG: fail (LED). Speaker
+ PASS: Pass (LED). Speaker
