HILO-test IPG 506 ເຄື່ອງສ້າງຄວາມຖືກຄວາມຕ້ອງຂອງເຄື່ອງສ້າງຄວາມຖືກຄວາມຕ້ອງ (640 V; 0.5 kΩ - 3 GΩ; 5 kV ± 10%)
Mainframe
Microprocessor: Controlled touch panel 7”, capacitive
Optical Ethernet Interface: For remote control of the generator (Optional)
Interface for saving reports: USB
External Trigger: Input/Output Switch/10V
Connector: For external safety interlock loop 24 V=
External warning lamps: Red and green, 24 V=, 40 mA
Mains power: 90V – 264V / 50/60 Hz
Dimensions of desk top case (W * H * D): 450*180*500 mm³
Weight: 18 kg
Generator section
Output terminals:
Switch-unit: For successive testing of 8 devices
8HV: x 4 mm Ø connector
1GND: x 4 mm connector
DC spark-over voltage:
Test voltage: Controlled by a 12-bit DAC 640 V
Rate of rise: 100 V/sec
Measurement accuracy: 12-bit
Impulse spark-over voltage:
Test voltage: Amplitude of the open loop impulse voltage 5 kV ± 10%
Rate of rise (selectable): 100/200/500 V/µs, 1000/2000/5000 V/µs
Repetition time (selectable): 5 - 1000 sec
Number of pulses (selectable): 1 - 1000
Polarity of output voltage (selectable): Positive/Negative
Max. stored energy: 6 Joule
Measurement of spark-over voltage: 500 - 1500 V +5%/-15%
Monitor output: For impulse output voltage ratio 1000:1 ± 3%
Measurement of insulation resistance:
Measuring range: 0.5 kΩ - 3 GΩ
Test voltage (selectable): 50 V / 100 V
ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ