ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ
Conductivity:
Range: 0-20.00, 200.0, 2000µS/cm, 20.00mS/cm
Resolution: 0.01, 0.1, 1
Accuracy: ±0.5% F.S.
Calibration Points: 1 to 3 points
Calibration Solutions: 84µS, 1413µS, 12.88mS/cm
Temperature Coefficient: Linear (0.0 to 10.0%/°C), non-linear, USP, EP
Pure water compensation: yes
Reference Temperature: 20/25°C
Temperature Compensation: 0 to 100°C/32 to 212°F, automatic
Cell Constant: K= 1
TDS:
Range: 0.00 to 10.00, 100.0, 1000mg/L, 20.00g/L
Resolution: 0.01, 0.1, 1
Accuracy: ±1% F.S.
TDS Factor: 0.01 to 1.00(default 0.5)
Salinity:
Range: 0.00 to 10.00psu, 0.00 to 10.00ppt, 0.00-1.00%
Resolution: 0.01
Accuracy: ±1% F.S.
Resistivity:
Range: 0.00 to 10.00MΩ
Resolution: 0.01, 0.1, 1
Accuracy: ±1% F.S.
Conductivity ash:
Range: 1-100%
Resolution: 0.01, 0.1, 1
Accuracy: ±1% F.S.
Measurement modes: refined sugar or raw sugar
General parameters:
Stability conditions: Fast, standard, high precision
Measurement mode: Continuous or automatic end point lock
Timed interval reading: 10, 30, 60, 300 seconds or off
Calibration due reminder: 1 to 99 days or closed
Data transmission: Send to memory or printer
Connectivity: Bluetooth 4.0 or higher
Power type: 2x1.2V lithium battery or 2 AAA batteries
Ordering information: Tester, conductivity standard solutions and carry case
