Technical data:
Loads:3000kgf (29400N), 1500Kgf (14700N), 1000Kgf (9800N), 750Kgf(7355N),
500Kgf (4900N), 250Kgf (2452N), 187.5Kgf (1839N), 125Kgf (1226N),
100Kgf (980N), 62.5Kgf(612.9N)
Load dwell duration: 2s～99s, can be set and stored
Tungsten Carbide Ball indenter: 10mm
Measuring range: 3.18HBW~658HBW
Accuracy of indention measureing: ±0.5%
Accuracy of Brinell Hardness Value:
Hardness Range(HBW) Error (％) Repeatability(％)
≤ 125 ± 2.5 ≤3.0
125＜HBW≤225 ± 2.0 ≤2.5
＞ 225 ±1.5 ≤2.0
Max measurable height: 200 mm
Max measurable depth: 140 mm
Dimensions: 530mm×260mm×750mm
Power supply: 220/110 V, 50/60 Hz, 4A
Weight: 120kg
Standard blocks: 125-350HBW10/3000, 125-350HBW10/1000
Specification:
- Innovative closed-loop technology. The tester incorporates the latest load cell technology. The test load is applied via a closed-loop control unit with a load cell, a DC motor and an electronic measurement and control unit. The result is highly accurate measurements at all test loads up to 0.5%. The common load overshoot or undershoot as known from traditional dead weight, or open-loop, systems is eliminated. The absence of mechanical weights not only eliminates friction problems but also makes the equipment less sensitive to misalignments caused by vibrations.
- The whole weight of the tester is 50% less than the traditional dead weights type tester.
- Test load selection by keyboard and LCD screen. No need of handling heavy weights or cleaning the messy oil.
- Fully automatic test cycles. The hardness Tester features a fully automatic test cycle, load application, holding, unloading, is performed fully automaticly. This greatly improves reproducibility of test results since operator influence is eliminated.
- Selectable dwell times by screen. The indenter, load, and other test informations are showing clearly on the large LCD screen.
- The directions for 0.102F/D2 ratios selecting according to the materials and hardness range can be showing on the screen.
- Equipped with the special Brinell indention measure system which can measure the Brinell indention accurately, quickly, reliably. It is a new measuring method by using CCD camera to capture the indention image, instead of reading diameter from optical microscope by operator then calculating the test value.
- The HBA-3000A tester can connect any PC with USB port and runing the SPC software, then the special software supplying simplest operation as following.
- Both single testing and batch testing mode are available
- Tolerance setting, distinguishing and alarming
- Statistics values such as Max, Min, Avg, R and S are available
- Convert test result to other scales, such as HRC, HRB, HRA, HV, σb
- All test results and indention images are saved automatically
- Test report created in Microsoft EXCEL format, can be edit, copy, print as you will
- Software update freely
Standard configuration
Host machine 1
Standard block 125-350HBW10/3000 1
Standard block 125-350HBW10/1000 1
Ф10mm Tungsten Carbide Ball indenter 1
Mounting screws for indenter 1
Screwdriver for indenter mounting 1
Flat anvil, 80mmx185mm 1
Software disc
USB Key 1
USB Cable 1
Power supply wire 1
Dust cover 1
Optional accessories:
“V ”shape anvil, 80mmx185mm
Standard blocks of other value
Ф5mm Tungsten Carbide Ball indenter
Ф2.5mm Tungsten Carbide Ball indenter
Ф10mm Tungsten Carbide Ball
Ф5mm Tungsten Carbide Ball
Ф2.5mm Tungsten Carbide Ball
