ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ
Power supply: 220V 50Hz-12V
Charging power: ~220V 50HZ
Battery: MF12-10B
Working current: AC 3A; DC 3A
Charging duration: 8~15h
Battery duration: More than 6h
Aperture time: 3 ~ 5 seconds on / 3 to 5 seconds off
Magnetizing length: 50-200mm
Lift force: AC: ≥4.8㎏; DC: ≥18.5㎏
Weight: Probe: 3.2kg; Battery box: 2.9kg
Figure size: Probe: 208×48×148mm; Battery box: 165×142×77mm
List of completed set of the instrument:
Main detector, Probe&cable: 1 set
Charge& wire: 1 piece
Battery box: 1 box
Flexible joint: 2 pairs, 4 sections (on probe)
Power wire: 1 piece
Cable: 1 piece
Packing case: 1 piece
Operation instructions: 1 piece
Certifications: 1 piece
Mag particle testing equipment Magnetic Particle Testing For Surface Crack Testing
Brief Introduction
The portable series magnet yoke detector is a light and small magnetic particle flow detector device which magnetizing the magnetic work-piece by magnet yoke. It is suitable for flaw detect in varies parts, such as in oil-field, ship-building, diesel engine parts, miner, machinery, standard parts, oil pump and nozzle, airplane-manufacture, mobile parts, bridge-build, chemical industry, boiler, pressure vessels, railway industry products or the parts which have surface defect resulted in forging, quenching, welding and fatigue, such as connecting rod, crankshaft, bearing, high strength bolts, springs, forging parts, pipes, valves, blades, gears, rolling parts, anchor chain and the parts with complicated geometric figure.
There is AC, DC, AC-DC type of the portable series magnet yoke detectors. The power source for DC type detector is chargeable cell and can continuously work for 6 hours with one time charged. It is suitable for field operation of container, bridge and pipes without power supplier or high voltage is unable to connected. The AC type detector is charged with 220V and 110V power supplier. It is widely used since easy to operated, simple in structure, lightly in weight and easy to carry.
