ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ
Test range:
Voltage measurement range: 0-60V, Resolution: 1mV, Accuracy: ±30mV
Internal resistance measurement range: 0-1999mΩ, Resolution: 1mΩ
Capacity measurement range: 0-99999mAH, Minimum resolution: 1mAH
R1 R2 resistance: 1kΩ ~ 200kΩ
Accuracy:
Voltage measurement accuracy:
±(result * 0.1% + 3mV) (voltage 0-36V),
±(result * 0.1% + 30mV) (voltage 37-60V)
Current measurement accuracy:
±(result * 0.2% + 30mA) (current 0-10A),
±(result * 0.5% + 30mA) (current 1-30A)
Internal resistance measurement accuracy: ±(result * 1% + 1mΩ)
Capacity measurement accuracy: ±2%
Test speed:
Static test (All functions): 1.1-2s
Capacity test: Determine the capacity test time according to the battery capacity and discharge power
Internal CNC:
Maximum output voltage (Constant voltage + constant current): 20V
Voltage source index:
Output maximum current: 5A
Output maximum power: 80W
Ripple voltage: <20mV
Load adjustment rate: <10%
Response time (time from 0 to the highest output voltage): 1S
Internal CNC electronic load index:
Maximum discharge voltage: 62V
Maximum discharge current: 30A (continuous)
Limit power: 100W (continuous)
Load mode: constant current
Interface: Yes (with host computer software)
Accessories: Test fixture for resistance, Test fixture for voltage, Temperature probe, Power cable, Data line
Size & Weight:
Dimension (mm): 225(W)*110(H)*355(D),
About 3.6kg
Manual
Product introduction
In response to the production and testing needs of these rechargeable batteries, Our company has developed a special comprehensive rechargeable battery tester. This tester can make a quantitative and accurate measurement of some basic parameters of the battery, and can measure the open circuit voltage of the battery. Resistance, charge, discharge performance, battery capacity, especially for lithium battery functions, such as overcharge protection, over discharge protection, over current protection, short circuit protection and other functions, and the corresponding values have been measured, which greatly facilitates battery production Work with pre-sales and after-sales services, you can intuitively judge the performance and quality of the battery in a few simple steps, and also have a quick screening function, you can set the upper and lower limits of the measurement parameters, you can easily from a batch Defective batteries are quickly detected in the finished battery to improve production efficiency. In addition, some special functions are added to make it have some characteristics of general instruments and equipment, which expands the flexibility of the equipment and has the characteristics of a wide range of applications.
