ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ
Measurement methods
- MLSS: Light transmitted through the near infrared palace
- Water depth: semiconductor pressure sensor
Measuring range
- MLSS: 0 to 20000 mg / L
- Water depth: 0 to 5.00 m (digital display)
(Can measure up to 10.00m with cable extensions)
MLSS Measurement Modes Built-in linear suite for application-selectable measurement
For example:
Milk residue regime, food residue
Food residue regime
Combined septic tank mode
Sludge regime for wastewater treatment
Mud regime for manure treatment
Condensed sedimentation regime
Dividing
- MLSS: 10 mg / L (from 0 to 10000 mg / L); 100 mg / L (10000 to 30000 mg / L)
- Water depth: 0.01m
Device reproducibility
- MLSS: Within ± 2% of specified value under certain conditions (within ± 150 mg / L for 5,000 mg / L or less)
- Water depth: within ± 0.03m
Power source: AAA Alkaline dry battery (LR03 x 3)
With auto power off function (30 minutes after power on)
Size
Body: 70 (W) x 36 (H) x 170 (D)
Detector: Ф40 x 214
Test probe type: SSD-10Z
<With pressure sensor>
Standard cable length 6m (extendable up to 11m)
Body weight: Approximately 300 g, Detector: 550 g (cable not included)
Supplied include: Machine (with 6m cable), AAA alkaline dry battery (LR3 x 3), Test head with top and bottom impact resistant rubber, cleaning brush, strap
