ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ
Pressure Control: Auto Adjustment
Control Precision: plusmn0.002Mpa
Pressure Adjust: 0.00-1.0Mpa
Simulated Depth: 0-100m
Exhaust Pressure: 1.05Mpa
Max Pressure: 1.1Mpa
Precision: 0.001Mpa
Tank Thickness: 6mm
Fran Thickness: 30mm
Tank Diameter: 0.5m
Tank Water Level: 1.0m
Dimension: 600x780x1300mm
Material: SUS304#
Time Control: 0-999Min
Protection: Pressure valve protection, Electric leakage protection
Voltage: AC220V
Power Rate: 100W
Weight: 150KG
Standard: IEC60529:1989+A1:1999,GB4208-2008,GB7000.1(IPX8)
Standard:
Complies with IEC60529:2001 “Degrees of protection provided by enclosures (IP Code)”, “Enclosure Protection Level (IP Code)” “Lamps Part 1: General Requirements and Tests” 9.2.9 The requirements of the terms;
Application:
The main function of the equipment is to test the physical and other related properties of electronic and electrical products, lamps, electrical cabinets, electrical components, automobiles, motorcycles and their parts under simulated rain conditions. After the test, it is judged whether the performance of the product meets the requirements, so as to facilitate the design, improvement, verification and factory inspection of the product.
Features:
1. Applicable to IPX8 testing of products.
2. The whole body of IPX8 pressure immersion test device adopts SUS304# stainless steel plate with high-precision overall sub-arc welding, the outer mirror polishing, the inner layer is rough and thrown, the appearance is beautiful, convenient and clean and durable.
3. Special silicone seal ring (elasticity willnever aging, can be used for ten years).
4. There is time control function, the setting time is: 0-999 minutes. When the test time is reached, the pressure will be automatically stopped, and the air in the tank will automatically drained. The tester can open the can lid and take out the test sample.
5. There is a water inlet valve and a drain valve at the bottom of the tank, and can connect with a 5 meter water hose, bottom also with 4 wheels for movement
