ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ
Manufacturer: Met One
Model: E-SEQ-FRM
Origin: USA
Warranty: 12 months
Applications
- Regulatory criteria reference sampler networks: federal, state, local
- Academic Studies
- Remote Sampling Applications
- Comparative Studies
| Method: | Multi-event, sequential sampling of ambient air onto filter media |
| Regulatory Designations: | US-EPA PM2.5 For US-EPA PM2.5 and PM10-2.5 sampling: Teflon 2μm pore size membrane filter (regulation required). For US-EPA PM10 reference sampling Pallflex TX-40 quartz filter and Teflon media. |
| Sample flow: | Active flow control for 16.67 LPM. Sampled volume reported under actual and standard conditions |
| Calibration: | Temperature, barometric pressure and multi-point flow. |
| Internal Data Storage: | More than 130 days of interval data with 5 minute time resolution 132 filter records |
| Data Input/Output | Keypad/display for data retrieval and programming. RS232, USB serial and USB flash drive interface for data download |
| Operational Temperature: | -40°C to +50°C |
| Power Requirements: | 100-240 VAC 50/60 Hz 1.4 amps |
| Physical Dimensions (inches) without PM10inlet attached: |
System/Pump: 14.4 (w) x 14 (d) x 27 (h) Stand (at base) 24.5 (w) x 23.5 (d) x 29.6 (h) Total (at base) 23.5 (w) x 24.5 (d) x 56.6 (h) |
| Weight: | System/Pump 45 lb Stand 10.5 lb PM10 Inlet 5.3 lb |
