ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ
Rated input power: 1300 W
Output power: 730 W
Maximum torque: 44 / 16 Nm
Drill-Ø masonry: 24 mm
Drill-Ø concrete: 22 mm
Drill-Ø steel: 16 / 10 mm
Drill-Ø soft wood: 40 / 25 mm
No-load speed: 0 - 1100 / 0 - 3100 rpm
Revolutions at rated load: 1100 / 3100 rpm
Maximum impact rate: 58900 bpm
Gears: 2
Chuck capacity: 1.5 - 13 mm
Collar diameter: 43 mm
Drill spindle with hexagonal recess: 6.35 mm
Drill spindle thread: 1/2 " - 20 UNF
Chuck clamping type: keyless chucks
Weight (without power cable): 2.8 kg / 6.2 lbs
Cable length: 4 m / 13 ft
Vibration
Drilling in metal: 4.2 m/s²
Uncertainty of measurement K: 1.5 m/s²
Impact drilling concrete: 17 m/s²
Uncertainty of measurement K: 1.5 m/s²
Noise emission
Sound pressure level: 103 dB(A)
Sound power level (LwA): 114 dB(A)
Uncertainty of measurement K: 3 dB(A)
Delivery
Futuro Top keyless chuck
Plastic carry case
Drilling depth guide
Rubber-coated side handle
Accessories
DRILLING/CHISELLING
Drill bit assortments, Further accessories for (impact) drills
ACCESSORY SETS/SPECIALS
Bit sets
CHUCKS
Keyless chucks
SCREWDRIVING/FIXING
Screwdriving bit sets
Features
Vario-Tacho-Constamatic (VTC)-Full Wave Electronics for work with materials requiring customised speeds, which remain constant under load
Thumbwheel for Speed Preselection
Selectable "impuls" mode for removal of stubborn screws and for spot-drilling on smooth surfaces
Robust die cast aluminium gear housing for optimum heat dissipation and long service life
Rotating carbon brush bridge for maximum performance even in anti-clockwise operation, e.g. for the removal of stubborn screws
Metabo Marathon-motor with dust protection for long service life
Metabo S-automatic safety clutch: mechanical decoupling of the drive for safe working should the tool stop unexpectedly
Forward and reverse rotation
Spindle with hexagonal recess for screwdriver bits for working without chuck
Overload protection: protects the motor from overheating
Restart protection: prevents unintentional start-up after power supply interruption
Cable-protecting ball joint for optimal freedom of motion when working
Wear Indication for Carbon Brush
