ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ
DISPLAY & BUZZER
- 2,000-count backlit LCD : yes
- Direct display in Volt/m (compatible with standards) : yes
- Buzzer proportional to the level of the Field E : yes
- Indication of the measurement frequency range: yes
- “Low battery” and “Hold” indicators : yes
COMMANDS
- Start/Stop (with automatic stop 30mn) : yes
- Measurement Hold function : yes
- Buzzer Start/Stop : yes
- Selection of measurement range : auto
- Selection of 3 kHz fi lter (<, >, full band) : yes
ANTENNA & REFERENCE
- Removable 62 mm “fi eld” antenna : yes
- + Cable detection function : yes
- Field measurement referenced to the individual : yes
- Field measurement referenced to earth : yes
- + Rod : yes
MEASUREMENT
- “RMS” electric fi eld intensity in V/m : yes
- Sensitivity & Accuracy
+ 2 sensitivity ranges (compatible with standards) : 1.0 to 200.0 V/m ; 100 to 2,000 V/m
+ Accuracy (in “laboratory” conditions) : ± 3% ± 5 D at 50/60 Hz
- Frequency Range
+ Analysis of electrical distribution, 10 Hz to 3 kHz: yes
+ Analysis of equipment connected to the mains : 5 Hz to 3 kHz (3 kHz low-pass fi lter); 3 kHz to 100 kHz (3 kHz high-pass fi lter); 5 Hz to 100 kHz (3 kHz without fi lter)
GENERAL SPECIFICATIONS
- Power : 9 V battery (included) - Battery life 60 - 80 hours - Automatic shutdown (30 min)
- Safety Protection : Reversed (M/F) antenna and earth terminals, Protected reference contact
- Metrology: Metrological monitoring available via the Chauvin Arnoux / AEMC network
- Mechanical specifi cations IP65 protection
- Dimensions: 63.6 x 163 x 40 mm
- Weight: approx. 200g with battery
State at delivery: delivered with an external fi eld and cable detection antenna (HX0100), 5 m earth cable (HX0103), socket tester, hard case 270 x 195 x 65 (HX0109)
Optional compatible accessories for VX 0100:
- Rod P01102084
- Adapter for rod (x2) P01102034
