ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ
Measurement range: ±1mm
Resolution:0.01 m
Max. permissible probing error: MPEPʺ0.45 m (LEGEX500/700/900: When the ø4X18mm stylus is used.)
Max. permissible probing error during scanning: MPETHPʺ1.4 m (LEGEX500/700/900: When the ø4X18mm stylus is used.)
Spring rate: 0.2N/mm
Max. stylus length: 200mm for both vertical and horizontal
Max. stylus mass: 75g
Stylus mount: M4 screw
Max. tracing speed: 120mm/s [at a known geometry scanning]
Air flow rate: 30NL/min
Probe head: N/A
Applicable models: CNC CMM (LEGEX500/700/900/1200 series)
Automatic stylus change system (optional):
- 4 standard units [Port 1 is dedicated for the standard stylus (for calibration purpose)]
- Expandable to max. 10 ports. Note, all styli should be arranged on the same axis.
Configuration
MPP-300 probe main unit
Damping oil
Connection air hose
Storage box
ø4X18mm stylus
