NI REM-11120 ໂມດູນປ້ອນອຸນຫະພູມສໍາລັບ I/O ໄລຍະໄກ (-25°C ~ 60°C, 4-Ch, +/-100MV)

The following specifications are typical for the range -25 °C to 60 °C unless otherwise noted.

Input Characteristics

Number of inputs

Thermocouple/Linear voltage: 4

Voltage (-5 V to +5 V): 1

Input types

TC: U, T, L, J, E, K, N, S, R, B, C, W, HK

RTD: Pt 100 (2 external cold junctions, can also be used as input)

Resolution A/D: 24-bit

Measuring principle: Sigma/Delta process

Measured value representation: 16 bits (15 bits + sign bit)

Input filter time: 40 ms, 60 ms, 100 ms, 120 ms (adjustable)

Accuracy

Relative: 0.01%, typical

Absolute: ±0.19 K, typical

Short-circuit protection, overload protection of the inputs: Yes

Transient protection of inputs: Yes

Provides thermocouple input channels for remote I/O systems. Remote I/O modules must be used with a supported NI real-time controller.

The Temperature Input Module for Remote I/O features a features a thermocouple input range of ±100 mV and a voltage input range of ±5 V. It also has an adjustable filter time for improved measurement quality and optional external CJC or PT100 RTD measurements.A remote I/O system consists of an EtherCAT bus coupler and individual modules mounted on a DIN rail. You control the Temperature Input Module for Remote I/O from a real‐time controller, such as a CompactRIO Controller or an Industrial Controller. You can use remote I/O hardware to add low‐cost I/O for simple tasks while your controller handles advanced tasks such as image processing, motion control, and high‐speed or specialty measurements.

Datasheet