ONMEAS AT2617 ເຄື່ອງທົດສອບຄວາມຈຸ (100Hz, 120Hz, 1kHz, 10kHz, 100kHz)
Measurement Parameters: Cs-Rs, Cs-D, Cp-Rp, Cp-D, Rs-Q, Rp-Q, Z-D, Z-Q
Basic Accuracy: 0.1%
Test Frequency: 100Hz, 120Hz, 1kHz, 10kHz, 100kHz (5 points, 0.01%)
Test Range: Auto, Manual, and Nominal, 9 ranges
Test Speed: 30 readings/s, 10 readings/s, 3 readings/s
Output Impedance: 30Ω, 100Ω
Signal Level: ACV: 10.00mV~2.00V, Accuracy: 10%, CV Mode Accuracy: 6%
Monitor Parameters: Z, R, Δ, Δ%
Readings: All parameters 5 digits full: 99999
Display Range
C: 0.0001pF – 9.9999mF
R, X, Z: 0.0001Ω - 99.999MΩ
D: 0.0001 – 9.9999
Q: 0.0001 – 9999.9
Δ%: -999.999% - 999.999%
Equivalent Mode: Series and parallel equivalent
Average Count: 1~256
Trigger Mode: Internal, Manual, External, and Remote
Trigger Delay: 0.01ms~60s
Comparator: PASS bin (BIN1-BIN3): Both primary and secondary parameters pass; AUX bin: Primary parameter passes but secondary parameter fails; FAIL bin (OUT): Primary parameter fails. HI/ IN/ LO: Primary parameter high/ pass/ low
Comparison Mode: Sequential/Absolute Deviation/Relative Deviation
Calibration: Open circuit zero, short circuit zero (sweep frequency and spot frequency)
File: Internal storage: 10 files; External USB storage: 10 files
Data Logging: 9999 groups of files (.csv)
Beeper Function: Off/Pass/Fail
nstrument Dimensions: 264(W)x107(H)x349.5(D)mm
Net Weight: 3kg
Power Requirements: 90V-260VAC, 50Hz to 60Hz
Interface: Handler interface/RS232 interface (Standard); RS485 interface/GPIB interface (Optional)
Communication Protocol: SCPI/Modbus
ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ