ONMEAS AT5120 ເຄື່ອງທົດສອບຄວາມຕ້ານທານຕ່ຳ DC (20 CH; 1μΩ – 300kΩ)
Number of Channels: 20 channels (scanning measurement)
Measurement Parameters: DC Low Resistance: DC low resistance
Basic Accuracy: 0.05%
Measurement Range: 1μΩ – 300kΩ
Signal Source: Maximum Current: 1μA – 1A
Current Mode: Auto
Range: Auto / Manual / Nominal
Measurement Speed: Slow: 3.4s/10ch, Medium: 830ms/10ch, Fast: 350ms/10ch, Ultra-fast: 230ms/10ch
Display Results: 20-channel direct reading display
Maximum Reading: 30,000 (Slow & Medium); 3,000 (Fast & Ultra-fast)
Calibration: Full-range short-circuit zeroing
Comparator: Independent setting for each of the 20 channels
Trigger Mode: Internal trigger and remote trigger
Temperature Compensation: Accuracy: 0.2°C, Range: 0–80°C
Test Terminals: 4-terminal sensing (2 sense + 2 drive with external shield ground
Contact Check Function: Independent detection on positive (D+/S+) and negative (D-/S-) terminals
Instrument Dimensions: Approx. 216 × 88 × 323 mm (W × H × D)
Net Weight: Approx. 3.5 kg
Power Requirements: Voltage: 198–240 VAC, Frequency: 50 Hz, Power: 20 VA
Interface: RS-232C (SCPI command set), HANDLER (PLC interface), USB, Temperature compensation interface
ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ