PICO 5462E+ MSO ອອດຊິວສະໂຄບຄອມພິວເຕີ (4CH; 60/200 MHz)
Vertical (analog channels):
Input Channels: 4
Bandwidth (−3 dB): 16-bit mode: 60 MHz; 8-bit mode: 200 MHz
Rise Time (10% to 90%, −2 dBFS): 16-bit mode: 5.8 ns; 8-bit mode: 1.75 ns
Selectable Bandwidth Limits: 16-bit mode: 20 MHz, 60 MHz; 8-bit mode: 20 MHz, 60 MHz, 100 MHz, 200 MHz
Vertical Resolution: 8/16 bits
Enhanced Vertical Resolution (Software): Hardware resolution + 4 bits
Input Connector: BNC(f)
Input Characteristics: 50 Ω: ±2%; 1 MΩ: ±1% ∥ 13 pF ±2 pF
Input Coupling: 50 Ω: DC; 1 MΩ: AC/DC
Input Sensitivity: 50 Ω: 1 mV/div to 1 V/div (10 vertical divisions); 1 MΩ: 1 mV/div to 4 V/div (10 vertical divisions)
Input Ranges (Full Scale): 50 Ω: ±5 mV[1], ±10 mV[2], ±20 mV[3], ±50 mV, ±100 mV, ±200 mV, ±500 mV, ±1 V, ±2 V, ±5 V; 1 MΩ: ±5 mV[1], ±10 mV[2], ±20 mV[3], ±50 mV, ±100 mV, ±200 mV, ±500 mV, ±1 V, ±2 V, ±5 V, ±10 V, ±20 V
[1]: ±5 mV only available up to 100 MHz
[2]: ±10 mV only available up to 200 MHz
[3]: ±20 mV only available up to 350 MHz
DC Gain Accuracy: ±(0.5% of signal + 1 LSB)
DC Offset Accuracy: ±(1% of full scale + 300 μV); offset accuracy can be improved using the Offset Correction function (Settings > Device) in PicoScope
LSB Size (Quantization Step Size): 16-bit mode: < 0.002% of input range; 8-bit mode: < 0.4% of input range
Analog Offset Range: ±25 mV; ±250 mV; ±2.5 V; ±5 V; ±20 V depending on range and coupling
Analog Offset Control Accuracy: ±0.5% of offset setting, additional to DC accuracy above
Overvoltage Protection: 50 Ω: 5.5 V RMS max, ±20 V pk max; 1 MΩ: ±100 V (DC + AC peak) up to 10 kHz
Digital Channels (MSO Only)
Input Channels: 16 (2 logical ports of 8 channels each)
Input Connector: 2.54 mm pitch, 10 × 2 way connector
Maximum Input Frequency: 100 MHz (200 Mbit/s)
Minimum Detectable Pulse Width: 5 ns
Threshold Grouping: Two independent threshold controls; Port 0: D0 to D7; Port 1: D8 to D15
Threshold Range: ±5 V
Threshold Accuracy: < ±350 mV (inclusive of hysteresis)
Threshold Hysteresis: < ±250 mV
Input Dynamic Range: ±20 V
Minimum Input Voltage Swing: 500 mV peak-to-peak
Input Impedance: 200 kΩ ±2% || 8 pF ±2 pF
Channel-to-Channel Skew: 2 ns typical
Minimum Input Slew Rate: 10 V/μs
Overvoltage Protection: ±50 V (DC + AC peak) up to 100 kHz
Triggering
Source: Any analog channel, AUX I/O trigger; MSO models: D0-D15
Trigger Modes: None, Auto, Repeat, Single, Rapid (segmented memory)
Advanced Trigger Types (Analog Channels): Edge, Window, Pulse Width, Window Pulse Width, Level Dropout, Window Dropout, Interval, Runt, Transition Time, Logic
Logic Trigger Capabilities: AND or OR function of any trigger sources
Logic Trigger Capabilities: NAND/NOR/XOR/XNOR of up to four analog channels or digital ports plus aux input
Logic Trigger Capabilities: User-defined Boolean function of up to four analog channels or digital ports plus aux input (PicoSDK only)
Trigger Sensitivity (Analog Channels): 1 LSB accuracy across full bandwidth with adjustable hysteresis
Advanced Trigger Types (Digital Channels): Edge, Pulse Width, Level Dropout, Interval, Digital Pattern, Logic
Pre-Trigger Capture: Up to 100% of capture size
Post-Trigger Delay: PicoScope 7: 0 to >4 × 10⁹ samples; PicoSDK: 0 to >1 × 10¹² samples
Trigger Holdoff by Time: Up to 4 × 10⁹ sample intervals
Rapid Trigger Mode Rearm Time: < 700 ns on fastest timebase
Maximum Trigger Rate (Rapid Mode): PicoScope 7: 40,000 waveforms in 20 ms; PicoSDK: up to 2 million waveforms per second
Continuous Waveform Update Rate: Up to 300,000 waveforms per second
Trigger Time-Stamping: Time from previous waveform with sample-interval resolution
Trigger Frequency Counter: Hardware-based measurement with up to 7 digits of resolution
ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ