PW Instruments PW-CTH150-40 ຫ້ອງທົດສອບອຸນຫະພູມ ແລະ ຄວາມຊຸ່ມຊື່ນຄົງທີ່ (150L,-40℃～150℃,20%～98%RH)

Temperature Range: -40℃～150℃

Humidity Range: 20%～98%RH

Heating Rate: About 3℃/MIN

Control of Uniformity: Temperature ±1.0℃, Humidity ±3.0%RH

Internal Dimensions: W50×H60×D50cm

External Dimensions: W78×H167×D115cm

Inner Box Material: Mirror stainless steel plate (SUS#304)

Outer Box Material: Electrostatic spraying of first grade steel plates

Test Hole: Diameter 100mm, with silicone stopper

Controller: 7″ colour touchscreen controller

Display Accuracy: Temperature ±0.01°C; Humidity ±0.01%

Controller Specifications: Upper and lower limit standby and alarm function with power failure program memory, automatic start and successive execution of the program after power resumption function with appointment start function; time adjustment function, with communication interface control function (software can be distributed)

Program Capacity: Maximum 12 program groups, 120 program segments, each segment can be set from 0 to 99Hour59Min.

Program Loop: Each program group can be looped 999 times, and partial loops and program links are also possible.

Program Editting: With editing, clearing, inserting and other functions, each page can input 4 sections of temperature and time.

Security Protection: Leakage switch, no-burn protection, water shortage protection, over-temperature protection

Total Power: 5KW 380V 50/60HZ

PRODUCTS DETAILS

This machine is designed for materials to complete high and low temperature testing, with beautiful appearance and reasonable structure, to meet the high temperature -40 to 150 degrees, humidity 20% ~ 98% of the test conditions, because of high cost performance, for the majority of material manufacturers to use.

Structural Materials:

Inner Chamber Material: Mirror finish stainless steel plate (SUS#304).

Outer Chamber Material: First-grade steel plate with electrostatic spray coating.

Base Material: National standard angle iron.

Insulation Material: Rigid Polyurethane foam + glass wool.

Air Circulation System: 90W Motor / Extended shaft / Multi-blade impeller / Special adjustable louvers air circulation system.

Chamber Door: Single door, left opening, handle on the right side.

Window: Triple vacuum layer.

Door Latch: Embedded non-reactive flat handle.

Rear Knob: SUS#304.

Viewing Light: 5W.

Test Hole: One 50mm test hole on the left side of the chamber body, with one silicone plug.