Seitron S9000-2 Biogas Analyzer (25% O2, 8000ppm CO, 5000ppm NO/NOx)
Gas Measurement Sensors: Up to 9 (configurable among electrochemical, NDIR, and Pellistor)
Gas Measurement Ranges:
O2: 0–25%
CO: 0–8000ppm
NO/NOx: 0–5000ppm
CO Dilution Auto-Range: Up to 10%
Calculations: Efficiency, Loss, Excess Air, & CO2
Probe: 12” (300mm), 1470°F (800°C) max, with 10’ (3m) Dual Hose
Battery: Rechargeable Li-ion Pack with internal protection circuit, charges from 0% to 90% in 8 hours
Operating Time: 10 hours (except printer and Peltier Chiller)
Display: Large Full-Color Graphic Screen
Built-In Printer: Non-Fading Paper
Data Storage: Internal Memory (16,000 Tests)
Communication: Wireless Bluetooth
Cooler sample treatment
Drying system: Rapid water condensation using cyclone system
Type: Peltier cell
Set point temperature cooler: +41°F (+5°C)
Max. temp. deviation from set point: +50°F (+10°C)
Condensate emptying pump: Peristaltic hose 38 ml/min
Peristaltic duty cycle pump: 30s On .. 30s Off
Warm-up time: ~15 .. 20 minutes
Operating temperature: +23°F (-5°C) .. +113°F (+45°C)
Fuel Types: 12 preprogrammed + 16 user-programmable
Power supply: 100 .. 260V~, or Li-ion battery pack with internal protection circuit, rechargeable.
ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ