Using TDS meter and some common errors
During the process of using a TDS meter, you may encounter some problems such as unstable electrode operation, flickering display screen, or inconsistent measurement results between tests. It is necessary to know the cause of these errors and how to identify them to have the most appropriate solution
The sensitivity of the electrode decreases, making the processing speed slow
After a period of use, the TDS meter may experience a decrease in electrode sensitivity, leading to slow processing speed and affecting the accuracy of measurement results. You can recognize this problem when the device responds slowly or the TDS index displayed is unstable. These signs indicate that the electrode needs to be inspected and maintained to ensure the device operates efficiently and stably.
The display screen flashes
A common error when using a TDS meter is that the screen flickers continuously. This phenomenon often comes from the fact that the power source is no longer enough for the device to operate. In this case, you just need to check and replace the battery so the device can operate stably again. This is an important step to ensure that water testing equipment always operates continuously without interruption.
Measurement results are unstable
Although the TDS meter has an allowable error, if when testing the same water sample the difference exceeds 3–5%, the device may be having problems or the measurement method is not correct. To handle this, make sure you perform measurements according to the instructions for use and perform regular calibration.
How to handle errors when using a TDS meter
For slow processing speed errors due to reduced electrode sensitivity, the electrode should be calibrated regularly, especially before and after each measurement.
When measuring TDS, carefully dip the probe tip of the meter into the water sample. Make sure that the water does not exceed the level specified on the pen body, as some devices are not designed to be waterproof.
In addition, avoid measuring water with too high a temperature, as improper temperature can negatively affect the life and performance of the meter..
Refer to quality TDS meter at EMIN:
Hanna HI98129 EC TDS pH meter
The Hanna HI98129 not only measures pH but also integrates EC and TDS measurement functions, providing an ideal 3-in-1 device for many uses. From testing domestic water quality to applications in aquaculture ponds, hydroponics, or hydroponics, this product has become a popular choice with Vietnamese users.
The Hanna HI98129 TDS meter uses a fabric junction to measure EC and TDS, helping to increase the life of the electrode. A special feature is that the pH electrode can be easily replaced, ensuring the device operates stably for a long time. With a waterproof design, the device is suitable for use in wet environments while still maintaining high durability.
Hanna HI98129 is also equipped with many smart features such as automatic temperature compensation to ensure accuracy, function to keep results on screen, low battery warning, and automatic power off after 8 minutes of non-use.
Hanna HI9811-5 pH/EC/TDS/Temperature meter
Hanna HI9811-5 is a total dissolved solids (TDS) measuring device that combines many modern features such as automatic temperature compensation, flexible switching between measurement parameters, battery status display and low battery warning. . These features make the machine suitable for professional applications, bringing high efficiency during use.
The highlight of Hanna HI9811-5 is its water resistance, ensuring durability even in wet environments. The compact design and light weight of the machine bring convenience, ease of movement and use in many different locations..
