Suneast UXT-350 Wave Soldering (50~350mm, 4350*1480*1750mm)

Dimension：LxWxH(mm)4350*1480*1750

Weigh:Approx.1800kg

Power Supply:3PH 380V 50HZ

Startup Power:32KW

Operation Powr Consumption:Approx.8KW

Control System:PC+PLC

Spraying movement:Step motor

Spray Pressure:0.2Mpa-0.4Mpa

Flux Flow Arrange:Option

Auto Fill Flux:Standard

Exhaust:Top exhaust+Side exhaust

Exhaust Ducting Diameter(mm):Φ250

Exhaust Capacity:30m³/min

Preheating Mode:Hot air Convection / IR

Control Mode:PID

Preheating Zone Number:3

Preheating Length(mm):1800

Preheating Temperature:Room temperature~200℃

Warm-upTime(min):Approx.12min(setting：150℃)

Blower Motor:250W 3PH 220VAC

PCB Width(mm):50-350

Convoyor Direction:L-R (Option：R-L)

Conveyor Speed(mm/min):500~1800

Conveyor Height(mm):750±20

Available Component Heigh (mm):Top 120 (Option： 240); Bottom 15

Conveyor Speed Control Mode:Frequency converter closed-loop stepless speed regulation

Fingers:Spring tablet finger /D-40 duckbill finger/double hook finger/heavy double hook finger, choose one.

Conveyor Angle:4-7°

Type of solder Pot:Motor drive

Solder Pot Material:Casting Iron

Wave Height Adjustment:Inverter Approx：Digital Control by PC

Cooling Method:Forced air cooling, Option: water cooler

Heater Power:13.5KW

Solder Pot Temperature:300℃

Solder Pot Capacity:Approx.480KG

Wave Drive Power:180W*2 3PH 220VAC

Solder Pot Warm-up Time:Approx.150min (setting：250℃)

Temperature Control Mode:PID

Finger Cleaning System:Brush

Catalog